论文部分内容阅读
近期,为积极响应九钢集团精细化管理的号召,通过科技创新进一步降低生产成本,九钢自动化部联合技术中心、炼钢厂、轧钢厂积极开展螺纹钢全定尺销售“定重剪切”专项技术攻关。目前,该攻关项目进展顺利并取得良好成效。以往,连铸以坯子长度来定尺切割,由于连铸结晶器磨损使得孔径不一致造成重量偏差大,螺纹钢产生较多的非尺。针对此现象,技术攻关小组在每台方坯连铸机推钢区顶部跨行车上,加装一台5T吊钩秤和一个C型单坯专用吊具,
Recently, in order to positively respond to the call for the fine management of the Group and to further reduce the production costs through technological innovation, the Joint Technical Center of the 9 Steel Automation Department, the steel mills and the rolling mills are actively engaged in the sales of rebar full-length rulers "Special technology research. At present, the research project progressed smoothly and achieved good results. In the past, continuous casting to the length of billet cut to length, as a result of continuous casting mold wear and tear caused by inconsistent aperture diameter deviation, rebar to produce more non-feet. In response to this phenomenon, the technology research team installed a 5T crane scale and a C-type single-spreader spreader at the top of each billet caster to push the steel area.