【摘 要】
：
TiN–Ag composite coatings were prepared by pulsed bias arc ion plating. X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) were applied to analyze the compositions of the coatings. Tribological properties of the coatings were studied u
【机 构】
：
School of Energy Power and Mechanical Engineering,North China Electric Power University,Beijing 1022
论文部分内容阅读
TiN–Ag composite coatings were prepared by pulsed bias arc ion plating. X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) were applied to analyze the compositions of the coatings. Tribological properties of the coatings were studied using an MFT-R4000 ball-on-disk friction tester in the presence of lubricating greases containing multilayer graphene. Scanning electron microscopy (SEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used to analyze the worn surface compositions of the lubricating films. The results show that with the decrease in Ag in the film, hardness increased but electrical conductivity decreased. The coating with 10 at％ Ag content shows the best friction-reducing and anti-wear properties, which can be attributed to the moderate content of Ag embedded in the TiN crystal gap that enhanced the grain bonding force to improve the anti-wear and self-lubricating ability. Graphene can be adsorbed on the coating as a solid lubricant.
其他文献
Although several empirical wear formulas have been proposed, theoretical approaches for predicting surface topography evolution during sliding wear are limited. In this study, we propose a novel wear-prediction method, wherein the energy-based Arrhenius e
Although grease can effectively lubricate machines, lubrication failure may occur under high speed and heavy load conditions. In this study, Mn3O4/graphene nanocomposites (Mn3O4#G) were synthetized using a hydrothermal method as lubricant additives. The l
In this study, water soluble CuO nanostructures having nanobelt, nanorod, or spindle morphologies were synthesized using aqueous solutions of Cu(NO3)2·3H2O and NaOH by adjusting the type of surface modifier and reaction temperature. The effect of morpholo
The aim of this study is to fabricate the nanocomposite with low friction and high wear resistance using binary solid lubricant particles. The microstructure and tribological performance of the nanocomposite are evaluated, and the composition and film thi
The layered double hydroxide (LDH) is a kind of natural mineral, which can also be manually prepared. It has been practically applied in various fields due to its unique crystal structure and diversity of composition, size, and morphology. In this work, L
As a widely used engineering polymer, epoxy resin has been successfully employed in high-performance components and setups. However, the poor thermal and friction properties of traditional epoxy resin greatly limit its application in many extreme environm
In the present work, two types of novel nano additives, titanium sulfonate ligand/black phosphorus (TiL4/BP) and titanium dioxide/black phosphorus (TiO2/BP) nanocomposites, were prepared. The tribological behavior of the steel/steel friction pairs lubrica
In this study, the nanocomposites of MoS2 nanoparticles (NPs) grown on carbon nanotubes (MoS2@CNT), graphene (MoS2@Gr), and fullerene C60 (MoS2@C60) were synthesized, characterized, and evaluated for potential use as lubricant additives. By using the bene
Herein, a series of Ag coatings with different micro-dimples were fabricated on copper surfaces by laser surface texturing (LST) and magnetron sputtering. Multilayer graphene lubricating grease (MGLG) was prepared using multilayer graphene as an additive.
为了提升思想政治工作水平,文章首先阐述了高职院校开展朋辈教育的意义,然后论述了高职院校“3+3+1”朋辈教育体系的构建,包括朋辈讲师体系构建、教育内容体系构建、朋辈教育循环构建三个方面.