【摘 要】
：
The machining accuracy of workpiece is influenced by its orientation deviation,which is caused by the fixture-workpiece error.Based on the spatial coordinate th
【机 构】
：
School of Mechanical Engineering
论文部分内容阅读
The machining accuracy of workpiece is influenced by its orientation deviation,which is caused by the fixture-workpiece error.Based on the spatial coordinate theory,the orientation deviation of workpiece is measured by using an on-machine verification system,which can take into account the errors resulting from fixture manufacturing,installation and adjustment,location and clamping of workpiece.According to the least square method,the model of orientation deviation is built to determine the relationship between the theoretical and actual coordinate systems.The influence of orientation deviation on machining accuracy is quantified,and it is shown that the orientation deviation only affects the dimensional precision and position precision,rather than shape precision.In the experiment,the compensation processing ofrealtime errors was conducted,and the perpendicularity and inclination errors of the tetragonal part were reduced by 38.46％ and 47.06％,respectively.
其他文献
采用第一性原理赝势平面波方法,研究了单壁氮化硼(BN)纳米管在应力条件下的结构、力学和电学性质.计算了不同类型氮化硼纳米管的弹性模量、拉伸强度和Poisson比.结果表明: 氮
农田基础地力提升对于减施肥料和作物稳产高产有着重大现实意义,该文依托潮土长期定位试验,采用DSSAT(decision support system for agro-technology transfer)模型分析了长
为研究薄膜对日光温室结构抗灾害垮塌性能的影响，采用 ANSYS 有限元分析软件，模拟了单片薄膜受风雪、冰雹荷载作用情景，分析了薄膜厚度、尺寸（长度×宽度）、预张力和外荷载对单膜
为了明确减压贮藏对茭白的保鲜效果。以常压冷藏为对照，研究减压冷藏对“龙茭2号”茭白采后品质和细胞壁代谢的影响。减压贮藏可以较好的保持茭白壳的绿色，降低其失水，减轻木纤
利用溶胶-凝胶法和电场热处理工艺在玻璃表面制备出一层TiO2薄膜,采用DTA,Raman光谱,XRD和AFM等测试手段分析了TiO2薄膜在电场热处理过程中的晶化行为.然后在理论上分析了外
Mg-25 wt% Mg2Ni composite was prepared by sintered method, hydrided at 613 K and then ball-milled with 1.5 wt% PdCl2 additive for 51 h. The effects of PdC12 on
以小麦秸秆为原料，对其进行氨霉联合处理，在实验室自行设计的小型沼气发酵装置上进行厌氧发酵试验，研究氨霉联合处理中霉处理pH值（pH：3—7）对小麦秸秆沼气发酵产气特性的影响。结果
研究利用热重分析仪考查不同制备条件(热解温度、热解升温速率、热解气氛)下制得的低品质生物质废物(鸡粪与猪粪)半焦的燃烧特性,并考察其中的矿物质组分对半焦燃烧性能的影
以黄土丘陵沟壑区桥沟流域坡沟系统为原型观测对象,利用流域内布设的不同地貌单元大型径流场定位观测设施,分析了坡沟系统不同地貌单元在年、次降雨时间尺度下的侵蚀产沙特征
To improve the processing efficiency and the quality of orbital milling hole of aerospace Al-alloy,the bigpitch influence on cutting force and hole quality was