论文部分内容阅读
目的从源头上预防、控制和消除某烟标印刷建设项目可能产生的职业病危害,保障劳动者身体健康。方法进行职业卫生学调查,检测职业病危害因素,并对劳动者进行职业健康检查。结果该项目职业卫生情况较好;生产性毒物乙酸乙酯、异丙醇、二甲苯TWA检测值分别为164.9~193.0、67.1~127.1、1.7~6.3 mg/m3,STEL检测值为204.4~266.0、83.0~190.2、4.3~9.0 mg/m3,生产性噪声强度为83.7~85.0 dB(A),均符合国家职业卫生标准;职业健康检查未发现职业病观察对象或患者。结论该建设项目为一般职业病危害的建设项目,职业病危害控制效果基本符合相关法律法规、标准和规范的要求,厂方应继续落实各项职业卫生管理措施。
Objective To prevent, control and eliminate occupational hazards that may occur in a tobacco standard printing and construction project from the source and ensure the health of workers. Methods Occupational hygiene investigation, detection of occupational hazards, and occupational health examination of workers. Results The results showed that the occupational health status of the project was good. The TWA values of the produced poisons ethyl acetate, isopropyl alcohol and xylene were 164.9-193.0,67.1-127.1 and 1.7-6.3 mg / m3, respectively. The STEL values were 204.4-266.0, 83.0 ~ 190.2 and 4.3 ~ 9.0 mg / m3 respectively, and the productivity noise intensity was 83.7 ~ 85.0 dB (A), which all met the national occupational health standards. No occupational diseases or occupational diseases were found in occupational health examination. Conclusion The construction project is a general occupational hazard construction project. The control effect of occupational hazards basically meets the requirements of relevant laws and regulations, standards and norms. The factory should continue to implement various occupational health management measures.