再生冷却液对切削刀具有益 在当今的企业观念中,期望获得最高的生产效率是一个永恒的目标,在这一点上没有什么别的比在金属切削加工中表现的更为明显了。采用先进技术的机床中的昂贵的投资,为了最大限度的提高生产率和缩短停机时间,对生产管理者和操作者同样总是存在压力。令人有点奇怪的是,只要能“稍微地转变”一些操作细节就能进一步降低操作成本这一点有时却被忽略了。 金属切削或磨削过程中需要有极大的压力,由此会导致大量热的产生,因此必须用一种有润滑能力并能把所产生的热带走的液体喷淋工件和切削刀具(或砂轮)之间的接触点。 当今有一些水基冷却液已经发展成为一些专门由油、化学添加剂(如杀虫剂、防锈剂、耐特压添加剂、乳化剂等)和水混合配制而成的高级切削液,尽管这些切削液具有高级的化学成分,但这些水质的切削液有一 Regenerative coolant benefits cutters In today’s business philosophy, it is an eternal goal to expect the highest productivity possible, and nothing else is more evident than in metal machining. Expensive investments in state-of-the-art machine tools are also constantly under pressure for production managers and operators in order to maximize productivity and reduce downtime. Curiously, the slightest hint that operating costs can be further reduced by “shifting” some of the details of the operation is sometimes overlooked. Metal cutting or grinding process requires a great deal of pressure, which will lead to a large amount of heat generated, it must be a lubricating ability and can be generated by the heat of liquid spray the workpiece and the cutting tool (or grinding wheel ) The contact point between. Some water-based coolants have been developed today as high-grade cutting fluids that are specifically formulated from oils, chemical additives (such as insecticides, rust inhibitors, extreme pressure additives, emulsifiers, etc.) and water, Liquid has high chemical composition, but one of these water-based cutting fluids