Atomic Structure of Cu49Hf42Al9 Metallic Glass with High Glass-Forming Ability and Plasticity

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:CoolSky_BO
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Electron diffraction was used to study the local atomic structure of Cu49Hf42Al9 metallic glasses (MGs).The amorphous nature of the MG was fully retained after the compression test.The partial radial distribution functions (PRDFs) of the MG structure obtained from the atomic model using reverse Monte Carlo and density functional theory optimization display that the peaks of the first nearest-neighbour distances for Cu-Cu,Hf-Cu and Hf-Hf atomic pairs were located at 2.56 (A),2.78 (A) and 3.23 (A),respectively.The wide distribution of PRDF for Hf-Hf atomic pair explained the high plasticity of the material.
其他文献
In the present experimental investigation,Al-3 wt%Cu and A1-3 wt%Cu-0.5 wt%Mg alloys castings are produced by a horizontal solidification technique with a view to examining the interrelationship among growth rate (GR),cooling rate (CR),secondary dendrite
In this study,near fully dense (96.5%) pure tungsten bulks were additively manufactured and the cracking behavior was investigated.A crack network with a spacing of ~ 100 μm was observed in the fabricated bulks.It was observed that the laser scanning stra
Fe-10 at.%Cr alloy was implanted with hydrogen ions at room temperature,followed by annealing at high temperatures.The annealing process made the defects develop into large dislocation loops.The nature of the dislocation loops formed after annealing was s
The work is mainly to study the thermal stability including the phase stability,microstructure and tribo-mechanical properties of the A1B2-type WB2 and W-B-N (5.6 at.% N) films annealed in vacuum at various temperatures,which are deposited on Si and GY8 s
The dynamic mechanical relaxation behavior of Ti36.2Zr30.3Cu8.3Fe4Be21.2 bulk metallic glass with good glass-forming ability was investigated by mechanical spectroscopy.The mechanical relaxation behavior was analyzed in the framework of quasi-point defect
CoFe2O4 nanoparticles (NPs) and surface modified with gold (Au) have been synthesized by a thermal decomposition method.The obtained NPs and formation of CoFe2O4@Au core-shell (CS) were confirmed by characterizing their structural and optical properties u
Plasma nitriding is a widely used technology to enhance the surface performance and extend the service life of alloy parts.The current research mainly focuses on the influences of time,temperature,gas type and pressure parameters on nitriding behavior,whi
This paper clarifies two issues related to the prior cathodic polarisation treatment (PCPT) for the potentiodynamic polarisation test: whether PCPT can (1) remove the air-formed surface film and (2) affect the polarisation test results.X-ray photoelectron
A new method for evaluating the compactness of rust layers on steels has been proposed in the present study.The method includes adsorption and dehydration process of anhydrous ethanol.The protective ability of rust layers can be qualitatively reflected by