Preparation and Spectra Properties of BaO-Al2O3-P2O5-Sm2O3 System Protection Glasses

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:jiangshuang_1975
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The forming-regions of phosphate glasses doped with high Sm2O3 contents were studied by two step melting method. The relationship between absorption spectrum and rare earth contents was also discussed. The spectra of BASP glasses were measured by spectrophotometer. The results show that the forming regions will shrink with the increase of Al2O3 and it is difficult to form glass when [PO4]/[AlO4]<2. The forming regions tend to be a closed elliptical, and the intensity of characteristic absorption peak increases gradually with the increase of Sm2O3, the absorption lines broadens non-uniformly and there is approximate linear relation between optical density at the 1064 nm wavelength and Sm2O3 content.
其他文献
Cu47Ti34Zr11Ni8 bulk metallic glass (BMG) matrix composites containing in situ formed TiC particles and δ-TiCu dendrite phase were developed by copper mold cas
Laser engineered net shaping(LENS) process was investigated using Co-based superalloy powder with a high power continuous wave CO2 laser. Thin wall part with sm
Ge-Ga-Ag-S chalcogenide glasses with the composition Ge30Ga3Ag4S63 were obtained by the conventional melt-quenching method. According to the visible-infrared an
Grain boundary character distribution (GBCD) in the vicinity of clad-core interface in annealed aluminum brazing sheet was investigated by EBSD technique. The r
ULTIMET(R) alloy is a cobalt-based superalloy that undergoes a deformation-induced phase transformation from a face-centered-cubic (fcc) phase to a hexagonal-cl
A two-step anodizing process was used to prepare wide-range highly ordered porous anodic alumina membrane (PAA) in the electrolyte of oxalic acid. The effects o
Straight carbon nanotubes (CNTs) were achieved by simple thermal chemical vapor deposition(STCVD) catalyzed by Mo-Fe alloy catalyst on silica supporting substra
The influence of stirring parameters (stirring temperature, stirring speed and stirring time) on the particle distribution of 10%(volume fraction) SiC particula
Lost foam casting (LFC) is regarded as a cost-effective, environment-friendly vital option to the conventional casting process for production of near-net shape
A new kind of reactive toughening accelerator for epoxy resin,amine-teminated hyperbranched polymer (H2O-NMe2) was synthesized and characterized by FT-IR spectr