【摘 要】
：
Anodic dissolution behaviour of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at
【机 构】
：
Chemistry Department, Faculty of Science, Suez Canal University, Ismailia, Egypt,Chemistry Departmen
【出 处】
：
Journal of Materials Science & Technology
论文部分内容阅读
Anodic dissolution behaviour of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at different potentials. Effects of acid concentration, pH, scan rate and additive inhibitor on the potential were studied and they revealed that there is a considerable shift of potential. Potentiodynamic polarization measurements show that the corrosion rate of Ni in chloroacetic acid solutions increases by increasing the previous factors. However, by adding inhibitor, it decreases.
Anodic dissolution behavior of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at different potentials. Effects of acid concentration, pH, scan rate and additive inhibitor on the potential were studied and they revealed that there is a considerable shift of potential. Potentiodynamic polarization measurements show that the corrosion rate of Ni in chloroacetic acid solutions increases by increasing the previous factors. However, by adding inhibitor, it decreases.
其他文献
The Y2O3: Yb3+ , Er3 + microstructures were fabricated by a hydrothermal method without surfactants.The microstructures structure was characterized by X-ray dif
Co-substituted Ni-Zn ferrite was prepared by a chemical codeposition. The electromagnetic properties, zero reflection conditions and simulated reflection losses
. PZT piezoelectric ceramic with La2O3, SrCO3, BaO and Sb2O5 was prepared. It has high value of the piezoelectric strain constant d33 ( -681 PC/N) and high valu
Ceria- and alumina-pillared interlayered clays were synthesized in the presence of PEO surfactant by using laponite clay as raw material.And the synthesized pil
A series of lanthanum containing Ni-base catalysts were prepared by citric acid complex method.Carbon nanotubes (CNT) were synthesized bY catalytic decomposing
Effects of processing technology on the properties such as relative density, flexural strength, fracture toughness, hardness, etc. and the microstructure of rar
The study of recent years found that big bulk amorphous alloys were formed for some multi-element compositions at rapid cooling speed such as Zr-, La-, Fe-, Mg-
The forming-regions and properties were studied on phosphate system glasses Sm2O3 doped by two step melting method. It shows that with the increasing of rare ea
Phosphors with ( Ce0. 67 -xGdxTb0. 33 ) MgAl11 O19 (0 ≤ x ≤0.37 ) composition were prepared by sol-gel processing. The preparation process, crystal structure