Biomechanical researches on tissue engineering bone constructed by deproteinated bone

来源 :中华创伤杂志(英文版) | 被引量 : 0次 | 上传用户:tz1233211123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Objective:To study biomechanical changes of newly formed bones 24 weeks after repairing large defects of long bones of goats using heterogeneous deproteinated bone(DPB)prepared by modified methods as an engineering scaffold.Methods:According to a fully randomized design,18 goats were evenly divided into three groups:normal bone control group(Group A),autologous bone group(Group B)and experimental group(Group C).Each goat in Groups B and C were subjected to the periosteum and bone defect at middle-lower part of the fight tibia(20% of the whole tibia in length),followed by autologous bone or DPB plus autologous MSCs + rhBMP2 implantation,respectively and semiring slot fixation;while goats in Group A did not perform osteotomy.At 24 weeks after surgery,biomechanical tests were carried out on the tibias.Results:At 24 weeks after surgery,the results of anticompression test on tibias in three groups were recorded by a functional recorder presented as linear pressure-deformation curve.The shapes of the curves and their change tendency were similar among three groups.The ultimate pressure values were 10.74 Mpa±1.23 Mpa,10.11 Mpa±1.35 Mpa and 10.22 Mpa±1.32 Mpa and fracture compression rates were 26.82%±0.87%,27.17%±0.75% and 28.22%±1.12% in Groups A,B and C,respectively.Comparisons of anti-compression ultimate pressures and fracture compression rates among three groups demonstrated no significant difference(P_(AB)=0.415,P_(BC)=0.494).Three-point antibend test on tibias was recorded as load-deformation curves,and the shapes of the curves and their change tendency were similar among three groups.The ultimate pressure values of the anti-bend test were 481.52 N±12.45 N,478.34 N±14.68 N and 475.62 N±13.41 N and the fracture bend rates were 2.62 mm±0.12 mm,2.61 mm±0.15 mm and 2.81 mm±0.13 mm in Groups A,B and C,respectively.There was no significant difference between groups(P_(AB)=0.7,P_(BC)=0.448).The ultirates were 29.51°±1.64°,28.88°±1.46° and 28.81°±1.33° in Groups A,B and C,respectively.There was no significant difference between groups(P_(AB)=0.123,P_(BC)=0.346).Conclusions:The biomechanical characteristics of newly formed bones from heterogeneous DPB for repairing large segmental long bone defect are comparable to those of normal bones and autologous bones.DPB has the potential for clinical usage as bone graft material.
其他文献
主要介绍曲靖数字地震台网的建设、布局,所用主要设备和数据传输方式,以及数字地震台网的监测能力和主要功能.2008年曲靖市地震局建成数字地震台网,与地震遥测台网相比,扩大
桂基设计在公路桥梁工程中直接关系到整个工程的施工质量和造价.时公路桥梁桩基设计中的桩基沉降问题进行研究是非常必要的.
宕渣具有良好的工程特性,被越来越广泛地用于当前的公路工程建设中.本文根据5231省道兴泰公路宕渣路堤填筑的工程实践,对宕渣路堤填筑的施工工艺进行了总结,并对质量检测方法
采用线性趋势分析和t检验、滑动t检验方法对濮阳1954年12月-2008年11月的月、季、年降水资料进行综合分析.结果表明:濮阳年降水量总体呈减少趋势(-8.66mm/10a,|t|=1.5694<t_(0
在铁路信号动态检测系统、列控设备动态监测系统和应答器数据管理系统运用的基础上,重点对信号检测项目、数据处理、设备管理等相关技术标准,数据转储设备,地面数据管理系统
四川省西北部是我国岩金矿床分布的重点地区之一,尤以微细浸染型金矿床为主。该区有刷经寺联合村、嘎拉、金木达等大中型与超大型金矿床,显示出金矿成矿的良好前景。研究区处
文章论述了太原—佳县高速公路采空区治理工程的设计、注浆工程、质量监控等内容。通过对该注浆工程施工及检测结果,评价了治理工程的施工质量。 The paper discusses the d
为了提高JOPENS系统的运行质量,探讨分析该系统安装配置过程中遇到的问题、地震台站数据流终端的日常故障分析、数据库方面的故障维护,并结合实际工作,提出具体解决方案,为测
简要探讨铁路工程造价的合理控制,以及斜对铁路施工过程中的合理造价分析.
生态功能区划是研究生态系统服务功能、判断生态系统分异和变化规律、提出生态退化恢复对策的基础。在综合分析怀仁县生态环境现状的基础上,以卫星影像图和森林资源二类清查数据库为基础,利用ArcG is软件的多层叠加功能,采用图形叠置法将怀仁划分为3个生态区,6个生态功能区,并根据各区主要生态问题提出了生态建设与保护对策。