在图纸规范化整理过程中,常遇到折叠或不整齐（幅面有大有小,宽窄、长短不一）而图纸又很多的情况。如果按部就班、慢条斯理、一张一张地边量尺寸边折叠,倒不是不可以的,但这不仅麻烦,费时费力,而叠完整卷后,往往还不齐,仍要重调整。 我在实践中,采取如下做法,不仅能使折叠的图纸幅面整齐一致,而且特别快捷。 先把应组一卷的图纸（也可更多）,按顺序排好,铺平,左边（装订侧）、下边分别取齐,然后在左边和下边分 In the process of standardization of drawings, they often encounter folds or irregularities (large and small format, width, length) and drawings a lot of circumstances. If you step by step, slowly, one by one side of the side edge size folding, it is not impossible, but this is not only cumbersome, time-consuming and laborious, and after stacking the whole volume, often still missing, still have to re-adjust. In practice, I take the following approach, not only to make the folded drawings neatly formatted, but also particularly fast. First should be a group of rolls of drawings (but also more), in order to Pai Pai, paved, left (binding side), respectively, below Qi, and then in the left and below points