家庭养花如果不多,又棵型不大,可以在窗前自己动手做一个简易实用的小温室,便可帮助花儿顺利越冬了。材料只要质轻的木板、钉子和塑料薄膜即可。先量好窗口的高(不量上面的小副窗,以便光线射入及通风透气)和宽,然后把木板(我用的是桐木板)锯截成两长两短的4块,厚2.5厘米,宽25厘米(根据花冠大小可宽可窄),钉成一个方框,内侧钉上两条用来放花的横档,外侧上部再钉上两个钉子,整个工序就完成了。上窗前,用塑料薄膜从木框上部向两边覆盖,外面紧靠窗玻璃,封住木框外口(薄膜应大于木框内外口),外框用图钉钉死,内框不可钉死,以便掀开浇水、施肥、换气等。而后把做好的窗前温室卡到窗口上,用两根16号铁丝从窗户的风钩鼻系 If the family is not growing flowers, but also small, you can do it in the window yourself a simple and practical small greenhouse, you can help the flowers smooth wintering. Materials As long as light wood, nails and plastic film can be. The first good amount of window height (not the amount of the above small vice window, so that light and breathable ventilation) and wide, and then plank (I use the Paulownia board) cut into two long and two short, thick 2.5 Cm, 25 cm wide (depending on the size of the corolla can be narrow and wide), nailed into a box, the inside of the nail on the two used to put flowers cross, the top of the outer nail twice, the entire process is completed. The top of the window, with a plastic film covered from the upper part of the wooden frame to both sides, the outside close to the window glass, sealed wooden box outside the mouth (film should be larger than the wooden box inside and outside the mouth), the outer frame with a thumb nail, In order to open watering, fertilization, ventilation and so on. And then do a good job in front of the greenhouse card to the window, with two 16 wire from the window of the wind hook system