论文部分内容阅读
一台正常工作的较驱,突然在进行读盘操作时,屏幕提示:Date error reading drive A:。怀疑软驱内部出现故障。于是从机箱中取出软盘驱动器,接好电源线及数据线,开机通电观察:软驱能来回寻道并最后定位在00道上,这表明软驱的寻道功能基本正常。但插入软盘进行操作时.磁头始终定位在00道上,过了一段时间后,出现了不读盘的现象。正常的情况下磁头会一边移
A normal working drive, suddenly reading disk operation, the screen prompts: Date error reading drive A :. Suspected floppy drive internal failure. So remove the floppy disk drive from the chassis, connect the power cable and data cable, boot power observation: floppy drive can back and forth and finally located on the track 00, indicating that the seek function of the floppy drive basically normal. However, insert the floppy disk to operate when the head is always located in the track 00, after a period of time, there is not read the phenomenon of the disk. Under normal circumstances the head will move aside