论文部分内容阅读
Experimental Analysis of A Cooling System for Wind-Driven Generator Stator
【机 构】
：
College of Aerospace Engineering,Shanghai Aircraft Design & Research Institute
【出 处】
：
南京航空航天大学学报（英文版）
【发表日期】
：
2004年期
其他文献
Effects of grain reifnement on cast structure and tensile properties of superalloy K4169 at high pou
In order to improve the ifling ability of large complex thin wal castings, the pouring temperature should be increased, but this wil result in the grain coarsen
To improve the mechanical properties and wear resistance of ZA27 alloy, Si was introduced to the alloy, and the effect of Si alloying and T6 heat treatment on t
Microstructures, micro-segregation and solidiifcation path of directionally solidiifed Ti-45Al-5Nb a
To investigate the effect of solidification parameters on the solidification path and microstructure evolution of Ti-45Al-5Nb (at.%) aloy,Bridgman-type directio
Effect of electric pulse modiifcation on mircostructure and properties of Ni-rich Al-Si piston alloy
In order to improve the properties of Ni-rich (2.5wt.%) Al-Si piston aloy, electric pulse modiifcation was applied in fabricating the Ni-rich Al-Si piston aloy
Radiation heat transfer model for complex superalloy turbine blade in directional solidiifcation pro
For the sake of a more accurate shel boundary and calculation of radiation heat transfer in the Directional Solidiifcation (DS) process, a radiation heat transf
Uteroferrin,also known as type 5 tartrate resistant acid phosphatase ( ACP5 ) or TRAP,is an iron-containing glycoprotein secreted by uterine gland epithelium (G
Due to the extensive application of Al-Si alloys in the automotive and aerospace industries as structural components, an understanding of their microstructural
The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-
A jet noise reduction technique by using the external chevron nozzle with lobed mixer in the double-mixing exhaust system is investigated under cold conditions.
An attempt is made to measure three direction forces using octagonal ring dynamometer in the 2024 aluminum alloy friction stir joining(FSJ)process.A test is mad