论文部分内容阅读
三、胎模锻件图胎模锻件设计是胎模锻设计的第一步,应与胎模锻工艺设计及胎模设计密切配合进行。胎模锻件图设计的主要内容如下: 1.分模面位置非旋转体(杆叉类、多枝体类)胎模锻件多采用合模焖形。其分模面位置的选择原则与锤上模锻基本相同。主要有:分模面位置应保证锻件焖形后能从模膛中方便地取出;应尽量使模膛的深度最小,宽度最大,
Third, the tire mold forgings Figure tire forgings design is the first step in the tire forging design, and the tire forging process design and tire design in close cooperation with the mold. The main contents of the tire die forgings diagram design are as follows: 1. The die surface position non-rotating body (pole fork class, multi-branch type) forgings and more use of mold stew-shaped. The principle of selecting the die surface position and hammer on the same basic forging. The main points are: mold surface position should ensure forgings stew shape can be easily removed from the mold cavity; mold cavity depth should be minimized, the maximum width,