Modeling on dynamic recrystallization of aluminium alloy 7050 during hot compression based on cellul

来源 :Journal of Central South University | 被引量 : 0次 | 上传用户:aa3002
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The dynamic recrystallization(DRX) process of hot compressed aluminium alloy 7050 was predicted using cellular automaton(CA) combined with topology deformation. The hot deformatation characteristics of aluminium alloy 7050 were investigated by hot uniaxia
其他文献
全球著名的管理咨询公司麦肯锡管理咨询公司在《移动服务中的IT因素》研究报告中曾明确指出,移动运营商如果需要快速而又有效地推出源源不断的新服务、就必须重新构建他们的IT
有着悠久历史的开封作为一座历史文化名城,它的经济发展程度远没有它所沉淀下来的历史文化那样引人关注.在它5县2区、面积为6444平方公里的管辖区内,80%~90%的工业几乎瘫痪,下
The galvanic corrosion behavior of metal-matrix composite plain carbon steel/boron carbide(B_4C) in 3.5%NaCl solution was studied.The composite was locally prod
结合工程实例提出了一种新的基于重合器和分段器的配电自动化模式,它仅依靠重合器同分段器的时间配合即可完成配电线路故障的隔离,同时又可通过通信手段对系统中的线路和开关
一、前言凭借在移动基础设施领域的领先地位以及与索尼爱立信和爱立信移动世界建立的密切合作关系,爱立信拥有得天独厚的优势,能够满足全球移动工作者的需求,无论他们身在旅
This work presents a fuzzy based methodology for distribution system feeder reconfiguration considering DSTATCOM with an objective of minimizing real power loss
The oxidation behaviors of Ni-16Cr-xAl(x=4.5%, 9.0%, mass fraction) superalloy foams in air at 1 000 °C were investigated. The effects of Al content on the
An annealed 50 Cr V4 steel was subjected to cyclic heat treatment process that consists of repeated short-duration(200 s)held at 840 °C(above Ac3 temperatu
1引言在高低压成套开关设备中,为防止误操作及误入带电间隔,均设计有机械联锁及电气联锁。机械联锁属于强制性联锁,性能可靠,大多数用户在定货时希望尽可能采用。为了防止操
Microstructure and mechanical properties of modified ultrahigh carbon(1.6%C)steels with different Mo additions(0,0.3%,0.5%,and 0.8%,mass fraction)were studied i