In the first part of the article, the column and the bag experiments concing removal of polycyclic aromatic hydrocarbons (PAHs) and nonpolar oil (NPO) from tunnel wash waters using organic sorbent materials have been described. This part presents the results of removal of toxic metals. The metals of conc (Al, As, Cd, Cr, Cu, Fe, Pb, Mo, Ni, and Zn) were selected based on the priority toxicant pollutants defined in surface water quality criteria. Concentrations of these metals in the collected effluents varied more than the concentrations of PAHs and NPO, and thus only metal contents were considered for statistical analyses. These analyses determined significant differences (P<0.05, P<0.01, and P<0.001) between the mean metal concentrations in the column effluents and those in applied wash water of road tunnel. The results obtained during both experiments revealed that the organic sorbents, and in particular their combination, removed toxic metals more effectively from wash water of road tunnel than from wash water of tunnel electrostatic filters. Among the investigated toxicants, Al and Fe showed the highest levels of reduction in the column experiment, 99.7% and 99.6%, respectively. The lowest reduction levels of 66.0% and 76.2% were found for Pb and Mo, respectively. The results of the bag experiment showed that even one day treatment of wash waters from tunnel electrostatic filters could reduce concentration of some toxicants by more than 70% (Al and Fe) and 80% (Cu).