论文部分内容阅读
由江苏工学院专利事务所代理的“大型冲压件自动卸料装置”专利技术,经反复试验,已研制成功,深受大家赞誉。目前,大型冲压件生产过程中,通常选用抛掷器、推出器和悬臂式机械手来实现将制件从模具上移出的卸料过程。这些卸料器械由于抛、推的卸料动作,对于大尺寸、特薄(厚度小于1mm)且外观质量要求很高的工件,显然是不适宜的。另外还有一种真空吸盘卸料装置,它对大尺寸的冲压件,也因作业时需多点吸附,而带来结构复杂、造价昂贵的缺点。
The patented technology of “Large-scale Stamping Parts Automatic Discharge Device”, which is authorized by Patent Office of Jiangsu Polytechnic University, has been successfully developed and praised by all over the world. Currently, large stamping parts in the production process, the thrusters, ejectors and cantilever manipulators are usually used to achieve the workpiece from the mold removal of the unloading process. These discharge equipment due to throwing, pushing the discharge action, for the large size, thin (less than 1mm in thickness) and the appearance of high quality workpieces, obviously not suitable. There is also a vacuum suction device, which for large-size stamping parts, but also because of the operation required more adsorption, and bring the complex structure, the shortcomings of high cost.