【摘 要】
：
在广西融水县实施甘蔗新品种桂辐98-296不同密度水平(4500芽、5500芽、6500芽、7500芽/666.7m2,下同)对比试验。实砍验收结果每666.7m2的原料蔗产量分别为6750.7kg、7370.7kg
论文部分内容阅读
在广西融水县实施甘蔗新品种桂辐98-296不同密度水平(4500芽、5500芽、6500芽、7500芽/666.7m2,下同)对比试验。实砍验收结果每666.7m2的原料蔗产量分别为6750.7kg、7370.7kg、7097.3kg、7033.3kg。因此建议在融水县中等肥力的丘陵旱地桂辐98-296的666.7m2下种量以5500~6500芽为宜。
In Guangxi Rongshui County, a new sugar cane variety Guiyu 98-296 at different density levels (4500 buds, 5500 buds, 6500 buds, 7500 buds / 666.7m2, the same below) comparative tests. Real cut acceptance results for each 666.7m2 of raw cane production were 6750.7kg, 7370.7kg, 7097.3kg, 7033.3kg. Therefore, it is suggested that in the middle fertile hilly county of Rongshui County, 666.7m2 of Guiyu 98-296 is planted with 5500 ~ 6500 buds.
其他文献
Chemical mechanical polishing (CMP) was used to polish Lithium triborate (UB_3O_5 or LBO) crystal. Taguchi method was applied for optimization of the polishing
SnO_2 hollow spheres and rod bundles were prepared using SnSO_4 as raw material and sodium dodecyl benzenesulfonate and poly(vinyl pyrrolidone) as templates at
Electromagnetic forming(EMF) is a high-velocity manufacturing technique which uses electromagnetic (Lorentz) body forces to shape sheet metal parts. One of the
Two-step growth regimes were applied to realize a homoepitaxial growth of ZnO films on freestanding diamond substrates by radio-frequency (RF) reactive magnetro
Two types of experiments were designed and performed to evaluate the adhesive bond in metal foam composite sandwich structures. The tensile bond strength of fac
Lead-loaded modified spent grain regenerated by desorption process was investigated. HCl, H_2SO_4, H_3PO_4, NaOH, NaCl and ultrapure water were chosen as desorp
The transformation behaviors of Pb fractions during composting of Pb-polluted waste without inoculants and with the inoculants of Phanerochaete chrysosporium we
Two novel washcoats Ce_(0.8)Zr_(0.15)La_(0.05)O_δ and Ce_(0.5)Zr_(0.2)O_2 was prepared by an impregnation method, which acted as a host for the active Pd compo
During the process of directional solidification, laser remelting/solidification in the layer on sintered magnets, die-upsetting of cast magnets, or die-upsetti