【摘 要】
：
In situ Al2O3 decomposed from Al2(SO4)3 reinforced aluminum matrix composites was fabricated through stirring cast by adding Al2(SO4)3 to the molten alloy which
论文部分内容阅读
In situ Al2O3 decomposed from Al2(SO4)3 reinforced aluminum matrix composites was fabricated through stirring cast by adding Al2(SO4)3 to the molten alloy which is the raw and processed materials from which industrial high purity Al2O3 is made. Not only production cost may be reduced but also SO3 decomposed from Al2(SO4)3 may refine and remove the gas from the molten composites by the way stated before. As a result, Al2O3 and matrix bonded well, no cast defects being found, such as gas hole, porosity and particles segregation in in situ Al2O3 decomposed from Al2(SO4)3 reinforced aluminum matrix composites It is considered the key fact of particulate reinforced aluminum matrix composites really being produced in industrial that SO3 decomposed from Al2(SO4)3 may refine and remove the gas from the molten composites.
其他文献
研究了以稀土固体超强酸SO2-4/TIO2/La3+为催化剂,癸二酸和正丁醇为原料合成癸二酸二丁酯,并考察了影响反应的因素.结果表明,醇酸量的比值为4.0,催化剂用量为1.0g,带水剂甲苯
得到了由卷积的某种积分形式给出的Littl ewood-paley算子和用ε算子族定义的推广的Littlewood-paley算子在Lipschitz函数类上的两个结果.
研究了ZSM-5催化剂上甲苯一硝化的区域选择性,以提高对位硝化能力,满足环境经济的双重发展要求.实验发现在以硝酸为硝化试剂时,高硅铝比的ZSM-5催化剂的对位硝化催化选择性好
本文介绍连续铸钢二冷区钢坯温度分布的计算以及喷水量的优化 .钢铁工艺对二冷区钢坯温度有一定要求 ,将其量化为求代价泛函最小问题 .对状态方程用有限元模拟遗传算法求问题
A new route to diastereoselective synthesis of (±) trans cognac lactone in five steps is described. The key intermediate methyl 3 formylbutanoate(4) was pre
粘度法是目前测定高聚物分子量最常用方法之一[1].通常情况下,测定需要经成膜、水洗、烘干、再溶解等一系列步骤.
以 4 0 ,6 0 ,8 0 ,10 0kR 4种剂量的6 0 Coγ射线对豫芝 4号、郑 95- 8、豫芝 11号 3个芝麻品种的风干种子进行辐射处理后播种。结果表明 :种子处理后芝麻产量提高 4
分析了滴流床反应器内4种典型流动型式的特征.针对滴流床反应器内流体流动的情况,应用了一种新的实验方法检测4种典型的流型.从所测电导率的频谱特征上发现了各流型的特性区
本文设计了一种层析型线阵推扫成象光谱仪.与色散型推扫成象光谱仪或干涉型推扫成象光谱仪不同的是,它用线阵CCD代替面阵CCD,同时又具有高通量、多通道、高信噪比、结构简单
以大粒小麦新品系兰考 86 (79) (源限型 )、豫麦 18号 (库限型 )和大穗小麦新品系黄 812 4(源库互作型 )为材料 ,对其生理特点及其与穗粒重的关系进行了研究。结果表明 ,源限