Synthesis of 2-Isopropyl Naphthalene Catalyzed by Et3NHCl-AlCl3 Ionic Liquids

来源 :China Petroleum Processing & Petrochemical Technology | 被引量 : 0次 | 上传用户:Sampan_nb
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper, 2-isopropyl naphthalene has been synthesized by the reaction of naphthalene and isopropyl bromide, using triethylamine hydrochloride-aluminum chloride ionic liquid as the catalyst. The effect of the catalyst composition, the reaction time, the reaction temperature, the ionic liquid dosage, as well as the molar ratio of the reagents on the 2-isopropyl naphthalene yield was systematically investigated. The optimal reaction conditions cover: an AlCl3 to Et3NHCl ratio of 2.0, a reaction time of 3 h, a reaction temperature of 15.0 ℃, a volume fraction of ionic liquid to the mixture(isopropyl bromide, n-dodecane and n-hexane) of 9%, and a naphthalene/isopropyl bromide molar ratio of 4.0. Under the optimal reaction conditions, the conversion of isopropyl bromide reached 98% and the selectivity of 2-isopropyl naphthalene was equal to 80%. The test results verified good catalytic activity upon using Et3NHCl-AlCl3 ionic liquid as the catalyst for alkylation of naphthalene with isopropyl bromide. The activity of the ionic liquid remains unchanged after it has been recycled for 4 times. In this paper, 2-isopropyl naphthalene has been synthesized by the reaction of naphthalene and isopropyl bromide, using triethylamine hydrochloride-aluminum chloride ionic liquid as the catalyst. The effect of the catalyst composition, the reaction time, the reaction temperature, the ionic liquid dosage, as well as the molar ratio of the reagents on the 2-isopropyl naphthalene yield was systematically investigated. The optimal reaction conditions cover: an AlCl3 to Et3NHCl ratio of 2.0, a reaction time of 3 h, a reaction temperature of 15.0 ° C, a volume fraction of ionic liquid to the mixture (isopropyl bromide, n-dodecane and n-hexane) of 9%, and a naphthalene / isopropyl bromide molar ratio of 4.0. Under the optimal reaction conditions, the conversion of isopropyl bromide reached 98% and the selectivity of 2-isopropyl naphthalene was equal to 80%. The test results verified good catalytic activity upon using Et3NHCl-AlCl3 ionic liquid as the catalyst for alkylation of naphthalene with i sopropyl bromide. The activity of the ionic liquid remains unchanged after it has been recycled for 4 times.
其他文献
智能涂料是近几年在新型特种功能涂料基础上发展起来的.本文主要对其制备方法、类别及应用进行了详细论述.智能涂料的制备可以从聚合物膜、颜料及制作工艺等方面入手,其中创
基于Ginzburg-Landau理论和单晶粒的枝晶生长模型,发展了一个单相场控制的多个晶粒的枝晶生长模型.采用相场和溶质场耦合的方法,以Al-2%Cu合金为例模拟了二元合金等温凝固过
The determination of the critical particle size between solid and fluid phases,i.e.,the suspension competence,is fundamental for debris flow.A method for determ
In order to study the dynamic characteristics of the single-frequency signal through the nonlinear control system,the system control mode,the outer excitation p
Urban water supply network is a modern urban survival and development of the infrastructure of a city,and its normal running conditions have important significa
In this paper,according to the defect of methods which have low identification rate in low SNR,a new individual identification method of radiation source based
The low-level jet (LLJ) is closely related to severe rainfall events, air pollution, wind energy utilization, aviation safety, sandstorms, forest fi re, and oth
To facilitate investigation of the effect of imperfect elastic dissipation on the propagation of Rayleigh-type channel waves and use of their quality factors in
A modified Lindstedt-Poincaré (LP) method for obtaining the resonance periodic solutions of nonlinear non-autonomous vibration systems is proposed in this pape