论文部分内容阅读
美刊《Military Technology》1989年第3期刊登了一张展示炮塔、侧面和车首上斜部装有全套反应装甲块的美国M2/M3 BRADLEY机械化步兵战车(MICV)/战斗指挥车辆(CFV)的照片,并载文详述了美国的反应装甲。 据报导,美国的反应装甲构件最初是由Aberdeen试验场弹道研究试验室设计的,后来是由Picatinny兵工厂陆军装备研究与发展中心(ARDEC)研制的,现在,米兰陆军弹药工厂(Milan Army Ammunition Plant)正在进行批量生产。 美国生产的反应装甲块只有两种标准型号,分别被称为M1和M2。这反映出美国采取的是与苏联一样的逻辑思想方法,同最初以色列为保证各种不同的车辆都能获得最佳的防护生产一些形状和尺寸不同的反应装甲块的基本思想相比有明显的差别。M1反应装甲块是正方形,边长力12吋×12吋(即30.5×30.5厘米),重为19磅(8.6公斤),而较大的M2则为长方形(12吋×18吋,30.5×45.7厘米),重为28磅(12.7公斤)。两种型号的厚度均为2吋(5.08厘米)。
Military Technology, No. 3, 1989 Published a USMC / M3 BRADLEY MICV / Combat Command Vehicle (CFV) demonstrating the turret, side and front ramp with a full complement of reactive armor pieces ) Photos, and the article details the United States reaction armor. It was reported that the U.S. reaction armor components were originally designed by the Aberdeen Experimental Field Ballistic Research Laboratory and later developed by the Army Equipment Research and Development Center (ARDEC) at Picatinny Arsenal. Now, the Milan Army Ammunition Plant, Ongoing mass production. There are only two standard models of reactive armor made in the United States, called M1 and M2 respectively. This reflects that the United States adopted the same logical and thought-provoking approach as the Soviet Union. Compared with the basic idea that Israel initially obtained the best protection for different vehicles and produced some reactive armor pieces of different shapes and sizes, difference. The M1 reaction armor block is square and has a length of 12 “x 12” (30.5 x 30.5 cm) and weighs 19 lbs (8.6 kg), while the larger M2 has a rectangular shape (12 “x 18”, 30.5 x 45.7 Cm), weighing 28 pounds (12.7 kg). Both models are 2 "thick (5.08 cm) thick.