【摘 要】
：
This paper presents an analytical model to solve the linear wave diffraction problem by arrays of bottom-mounted cylinders with arbitrary smooth cross-section. Based on the assumption of ideal fluid and potential theory, the unknown coefficients of total
【机 构】
：
Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of
论文部分内容阅读
This paper presents an analytical model to solve the linear wave diffraction problem by arrays of bottom-mounted cylinders with arbitrary smooth cross-section. Based on the assumption of ideal fluid and potential theory, the unknown coefficients of total velocity potential can be solved by system of linear equations, which are obtained from the boundary conditions. The accuracy of the present method is verified by comparing it with the numerical tool in terms of the wave force and wave run-up. Multiple cylinders with different configurations are tested, the cross-section of which is circular with cosine perturbation. The results show that the proposed method could obtain an accurate prediction of the wave action with multiple cylinder problems. Finally, the diffraction wave is investigated on arrays of bottom-mounted cylinders with different cross-section and layout. The near-trapping problem with effects of the multi-body interaction are also investigated.
其他文献
The movement principle of sidewalls and floor of extraction opening is analyzed, it is found that floor heave not only has something to do with the floor strata, but sidewalls. The effect of sidewall anchor and corner anchor is studied, the mechanical pri
Based on continuum mechanics and rock dynamics, analyzed the micro-structure damage of rock and the impulsive effect under high pressure water jet and developed the dynamic model. Further, on the assumption of that rock was homogeneous and isotropic, a co
A system of on-line contamination detecting in hydraulic oil based on silting principle is accomplished, where, metal filter membrane as detector, solenoid as active force to propel piston to blotter and gain differential pressure, step motor drives the m
By using the Radar penetrating technology and numerical simulations, the fractured zone could be easily determined. Both wall fractured zone and mining action of coal seam roadway were considered, and the bolt reinforcing criteria for wall including low l
It is well known that the formation permeability is not a constant but a function of the in-situ stress environment. This study has been primarily carried out numerically, and to a certain extent, in the field. However, since the rock properties are gener
The structure and principle of the GMM actuator and the new nozzle flapper valve with the GMA were presented. Based on the axis-symmetric FEM model of the GMA,driving magnetic field was computed. And the field distribution for different input currents and
An assistant surface was constructed on the base of boundary that being automatically extracted from the scattered data. The parameters of every data point corresponding to the assistant surface and their applied fields were calculated respectively. In ev
Coal forming environments in the tectonically controlled intermontane Stephanian Cévennes coal basin (Massif central, France) show a complex interelationship between structural and sedimentological features. The study of the general structural features an
Cavitating bubbly flows can form in separated flows and shear layers leading to local regions high vapor void fraction, and these flows often exhibit periodic shedding of vaporous clouds. Historically, the presence of a liquid re-entrant flow, driven by t
Shallow hydrofoils are known to produce lower lift in normal operating conditions in comparison with deep hydrofoils. However, the maximum lift capability of shallow hydrofoils at moderate speeds, which is important for transitional regimes of hydrofoil b