(接上期)2.5第三代钢渣热闷技术特点(1)钢渣热闷处理后f-CaO,f-MgO消解。稳定性良好,可100%利用。(2)节省热泼场设施和倒运设备,减少设备损耗和操作人员,消除了钢渣热泼、倒运对环境的污染。(3)对钢渣的流动度没有限制,即使是渣壳仍可进行热闷,钢渣处理率为100%。(4)钢渣热闷后粒度小于20mm的占65%~70%,用于建材减少破碎工作量。生产钢渣粉时亦可提高粉磨效率,降低电耗。 (Connected to the period) 2.5 The third generation of steel slag thermal nausea Technical characteristics (1) After thermal slag processing f-CaO, f-MgO digestion. Good stability, can be 100% utilization. (2) Save the hot and cold field facilities and equipment, reducing equipment wear and tear and operating personnel, eliminating the hot slag, pouring on the environment pollution. (3) There is no limit to the fluidity of steel slag. Even if the slag shell is still hot and stuffy, the slag treatment rate is 100%. (4) 65% ~ 70% granularity less than 20mm after steel slag is hot and stuffy, which is used to reduce the crushing workload of building materials. Steel slag powder production can improve grinding efficiency and reduce power consumption.