论文部分内容阅读
“优选法”,是多快好省地进行生产建设的好方法,是完成和超额完成国家计划的好措施。福建省生产建设兵团第三师邵武貯木埸党委重视“优选法”的应用,领导深入车间,发动群众,同工人、技术人员一起研究,一起搞试验,已获得三项显著的成果。一、应用“优选法”确定胶合板热压温度和时间。用“瞎子爬山法”提高热压温度,使豆蛋白胶五合板热压时间从25分钟缩短到20分钟,每个台班增产0.8立方米胶合板,全年可增产胶合板720立方米,增加产值25万元。二、应用“优选法”改变纤维板乳化剂配方。用“折纸法”经过七次实验,采用“M-80”
The “law of preference” is a good way to carry out production and construction more efficiently and economically. It is a good measure to complete and over-scale the state plan. The third division of the Fujian Production and Construction Corps, Shaowu Xudongmuji Party Committee attaches importance to the application of the “Law of Optimality” and has led the efforts to study in the workshop, mobilize the masses, study with the workers and technicians, and experiment with it. Three remarkable achievements have been obtained. First, the application of “preferred method” to determine the plywood pressing temperature and time. Increase the hot pressing temperature with the blind hill climbing method to shorten the hot pressing time of the soybean protein adhesive pentagonal board from 25 minutes to 20 minutes and increase the output of 0.8 cubic meters of plywood for each shift to increase the annual output of 720 cubic meters of plywood and increase the output value of 25 Million. Second, the application of “preferred method” to change the formula of the fiberboard emulsifier. With “origami method” after seven experiments, using “M-80”