Fabrication and characterization of honeycomb-like superstructures consisting of ZnS nanosheets

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:alfred0612
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Honeycomb-like superstructures consisting of ZnS nanosheets with uniform thickness of about 20nm and lateral dimension of several micrometers were built up from in-situ generated ZnS nanoparticles in the presence of ethylene diamine tetraacetic acid and butylamine. The result of HRTEM reveals that the size of the primary ZnS nanoparticles constituting the superstructures is about 2-4 nm. Upon their organization into complex superstructures,the quantum-confined effect of the ZnS nanosheets keeps well. The possible growth mechanism for ZnS superstructures was also proposed.
其他文献
The microstructure and mechanical properties of AZ31 Mg alloy processed by high ratio extrusion (HRE) were investigated. General extrusion with extrusion ratio
In part 1 of this two-part series, the formation mechanism of secondary ettringite has been discussed. In this part, the expansive mechanisms of secondary ettri
A self-made directional solidification setup was used to prepare high purity aluminum ingots of 100mm in diameter. The morphology of the growth interface was de
This work mainly investigated the influences of some factors, such as, synthesis methods, pre cursor alternatives, and vacuum heat-treating process, etc, on the
The creep behavior of directionally solidified (DS) superalloy IC10 was investigated under 192 MPa and 218 MPa at 980 ℃. Under the testing conditions, the mark
The main object of the present research is to make a quantitative evaluation on the microstructure of carbon materials in terms of microcrystal. The digitized i
To investigate the treating parameters influence on the surface roughness of the MAO ceramic coating on AZ91D, experiments were implemented in the alkaline elec
Al2O3/TiAl composites were fabricated by PAXD (pressure-assisted exothermic dispersion) method. The effects of Nb2O5 content on the microstructure and mechanica
Through the addition of rare earth oxides into the coating of electrodes, the high temperature oxidation and sulphidation resistance of weld metal were studied.
Effect of cooling rate on both microstructure and room temperature compressive performance of the AZ91 magnesium alloy was investigated. The experimental result