【摘 要】
：
The hydrogen peroxide,a green impregnating agent suitable for lignocellulosic biomass to bioethanol process,was used to pretreat sugarcane bagasse by steam explosion.Two different concentrations of hydrogen peroxide (0.2％ and 1％) were investigated.Then,th
【机 构】
：
Laboratory of Transport Phenomena and Biotechnology, Department of Computer Engineering, Modeling, E
论文部分内容阅读
The hydrogen peroxide,a green impregnating agent suitable for lignocellulosic biomass to bioethanol process,was used to pretreat sugarcane bagasse by steam explosion.Two different concentrations of hydrogen peroxide (0.2％ and 1％) were investigated.Then,the biomass was hydrolyzed after pretreatment using cellulase.The amount released of:(i) cellobiose;(ii) monosaccharides,as glucose,xylose,arabinose and mannose and (iii) lignocellulose derived by-products,as furans and small organic acids (acetic,formic,and levulinic acid),was evaluated in the hydrolysate samples,previously pretreated both in the presence and absence of impregnating agent.By adding of hydrogen peroxide in steam-pretreatment,the average yield increase was 12％ for glucose and as high as 34％ for xylose,and cellobiose yield was decreased of about 30％.No significant increase has been observed in arabinose and mannose yield.Furthermore,the hydrogen peroxide seems not increased the formation of lignocellulose derived by-products during pretreatment process,with the exception of the levulinic acid.
其他文献
The catalytic conversion of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) has attracted extensive research interests because DMF can be used as potential and competitive renewable transportation fuel or additives.Here we report a non-noble bime
Phosphorous tetrabenzotriazacorrole (TBC) and its two soluble derivatives (TBC-1 and TBC-2) were synthesized and used for the first time as undoped hole transporting materials (HTMs) in MAPbI3 perovskite solar cells (PSCs).Their performance in PSCs was me
We observe the influence of Al occupancies in Li sites on the formation process of the garnet solid electrolyte of Li7La3Zr2O12 (LLZO).A direct incorporation of Al is first promoted in a Li-insufficient garnet solid electrolyte during the calcination proc
The development of high-performance layered oxide cathodes for sodium ion batteries (SIBs) continues to facing be hindered by severe challenges to date.Herein,a single-phase P2-Na0.67Mn0.6Ni0.2Co0.1Cu0.1O2 (NMNCC) comprising multiple-layer-oriented stacke
Recently,an effective exciton diffusion length L exceeding 100μ m has been reported for organicinorganic halide perovskites owing to both the high mobility and ultra-long lifetime of the excitons;however,the origin of ultra-long L is still unclear in natu
Catalytic conversion of CO2 into chemicals and fuels is an alternative to alleviate climate change and ocean acidification.The catalytic reduction of CO2 by H2 can lead to the formation of various products:carbon monoxide,carboxylic acids,aldehydes,alcoho
A series of graphitic-C3N4/ZnS (g-C3N4/ZnS) supercapacitor electrode materials have been prepared via a one-step calcination process of zinc acetate/thiourea with different mass ratios under nitrogen atmosphere.The optimized g-C3N4/ZnS composite shows a h
The catalytic performance of Ni-containing limonite ore in the dry reforming reaction of methane (CH4+CO2→2H2+2CO) was determined before and after hydrogen reduction,and under a flow of hydrogen.After hydrogen reduction,the limonite ore exhibited higher c
Cobalt molybdate/non-stoichiometric cobalt sulfide (CoMoO4/Co1-xS) hybrid was in situ grown on nickel foam by a simple two-step hydrothermal process.The as-prepared CoMoO4/Co1-xS hybrid electrode possessed core-shell nanostructure,large surface area and h
Fast pyrolysis of biomass will produce various furan derivatives,among which 5-hydroxymethyl furfural (5-HMF) and furfural (FF) are usually the two most important compounds derived from holocellulose.In this study,density functional theory (DFT) calculati