比利时BALTOSPOT系列X光机配套的CF5微机控制箱,因其产品先进、操作方便,与进口同类产品比较价格亦稍低,因此受到我国无损检测工作者的青睐。通过长期使用觉得CF5控制箱也有不足之处,当X光机连续工作或在夏季环境温度稍高的季节工作时,CF5控制箱很容易发生故障,其原因主要是散热装置效果不良造成的,这可能与比利时地处北欧,气温较低,在设计中对高温使用的环境考虑较少等因素有关。我厂1988年引进三台GFC305周向X光机,在连续使用中经常发生CF5控制箱故障,主线路散热板部位的电器元件因散热不良造成脱煌或元器件损坏,影响生产,如要配进口元器件,修理费亦较昂贵。 Belgium BALTOSPOT series X-ray machine supporting the CF5 microcomputer control box, because of its advanced products, easy to operate, compared with the import of similar products are also slightly lower prices, so by our non-destructive testing workers of all ages. Through the long-term use of CF5 control box also has shortcomings, when the X-ray machine continuous work or work in the season in summer season slightly higher temperature, CF5 control box is very prone to failure, the main reason is the cooling effect caused by poor, which May be related to the fact that Belgium is located in northern Europe, the temperature is lower, and the environment is less considered in the design for high temperature use. I plant in 1988 the introduction of three GFC305 circumferential X-ray machine, CF5 control box in the continuous use of the failure of the main line of the radiator plate parts of the electrical components due to poor heat caused by off-Huang or components damage, affecting the production, such as to be equipped with Imports of components, repair costs are more expensive.