【摘 要】
：
The spontaneous magnetic transitions and corresponding magnetoelastic properties of intermetallic compounds RMn2Ge2 (R=Gd, Tb and Dy) were investigated by using the X-ray diffraction method and magnetic measurement. The results showed that the compounds e
【机 构】
：
School of Communication and Electronic Engineering, Hunan City University, Yiyang 413000, China;Scho
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The spontaneous magnetic transitions and corresponding magnetoelastic properties of intermetallic compounds RMn2Ge2 (R=Gd, Tb and Dy) were investigated by using the X-ray diffraction method and magnetic measurement. The results showed that the compounds experience two magnetic transitions, namely the second-order paramagnetic to antiferromagnetic transition at temperature TN (TN=368, 423 and 443 K for GdMn2Ge2, TbMn2Ge2 and DyMn2Ge2, respectively) and the first-order antiferromagnetic - ferrimagnetic transition at temperature Tt (Tt=96, 80 and 40 K for GdMn2Ge2, TbMn2Ge2 and DyMn2Ge2, respectively) as the temperature decreases. The temperature dependence of the lattice constant a(T) displays a negative magnetoelastic anomaly at the second-order transition point TN and, at the first-order transition Tt, a increases abruptly for GdMn2Ge2 and TbMn2Ge2, Δa/a about 10-3. Nevertheless, the lattice constant c almost does not change at these transition points indicating that such magnetoelastic anomalies are mainly contributed by the Mn-sublattice. The transitions of the magnetoelastic properties are also evidenced on the temperature dependence of magnetic susceptibility χ. The first-order transition behavior at Tt is explained by the Kittel mode of exchange inversion.
其他文献
Polytetrafluoroethylene (PTFE) is a commonly used seal material for oil-free engine that is well known for its excellent tribological properties. In this work, the nano-ZrO2 particles were used as the friction modifiers to improve the friction and wear pe
Sapphire,belonging to hexagonal crystal system,is typically anisotropic which makes it direction-sensitive.To research the effects of growth directions on properties of sapphire,c-[0001]seed(c-sapphire)and a-[11-20]seed(a-sapphire)were used to prepare sap
Silicon nitride ceramics were prepared by means of a hot-press sintering method. The ablation behavior was studied by plasma wind tunnel tests. The data suggested that, under low heat flux and stagnation pressure conditions, the ablation process was contr
A three-dimensional dynamic model for nano/micro-fabrications of silicon was presented.With the developed model, the fabrication process of silicon on nothing (SON) structure was quantitatively investigated. We employ a diffuse interface model that incorp
ZrB2-SiC based ultra-high temperature ceramic (UHTC) struts were firstly proposed and fabricated with the potential application in the combustor of scramjets for fuel injection and flame-holding for their machinability and excellent oxidation/ablation res
Calcium sulfate whisker (CaSO4 whiskers), a new type of microfiber material, was used in cement matrix to increase the strength of the cement based composites. Effect of CaSO4 whiskers on the mechanical properties of the resulting cement mortar was also s
A micro-scale finite element method (FEM) was proposed to precisely calculate the heat conduction between mortar and aggregate, and thus to accurately predict the non-uniformity of concrete pouring temperature. The concrete temperature field during vibrat
Triisopropanolamine (TIPA) was used as an early strength component to study its effects on mortar strength, cement paste setting time and early hydration characteristic of cement. And the early strength mechanism of TIPA at low temperature of 5 ℃ was also
A novel semisolid micro fused-casting (MFC) for preparing A356 alloy strips is proposed, and the effects of process parameters of pouring temperature on the microstructure and properties of A356 alloy strips are investigated. MFC means that the semisolid
A novel thermal-protective coating has been successfully prepared by CPED process on a cast Al-12％Si alloy with the addition of ZrO2 nano-particles in the electrolyte. The microstructures and phase composition of the coatings were analyzed by SEM and XRD,