【摘 要】
：
The cyclic voltametry and potentiostatic electrolysis was used to investigate the preparation of Bi-Fe alloy films in LiClO4-DMSO (dimethylsulfoxide) system. Th
【机 构】
：
School of Chemistry and Chemical Engineering
【基金项目】
：
广东省教育厅千百十工程优秀人才培养基金
论文部分内容阅读
The cyclic voltametry and potentiostatic electrolysis was used to investigate the preparation of Bi-Fe alloy films in LiClO4-DMSO (dimethylsulfoxide) system. The effects of several factors including the potential of deposition, current density and concentration of iron and bismuth in the solution on the Fe content in the alloy deposits were studied. Experimental results indicated that the amorphous alloy films of Bi-Fe containing Fe 4.40wt%-33. 67wt% could be prepared by controlling the system composition and deposition conditions. They were gray, uniform, metallic luster and adhered firmly to the copper substrates analyzed by EDS, SEM and XRD. After heat treatment of crystallization at 270℃ for 1h, the crystal phase of Bi-Fe can be found in XRD patterns.
其他文献
In this paper, a simple while effective deterministic algorithm for solving the VLSI block placement problem is proposed considering the packing area and interc
In mandarin all-syllable recognition, many insert errors occur due to the influence of non-consonant syllables. Introducing the duration model into the recognit
BaZnz Co2- z Fe16 O27 /SiO2 microcrystalline glass ceramics with Z=0.0, 0.5, 0.8 and 1.1 were prepared at temperature 1200℃ for 5h by citrate sol-gel process.
By considering that the coherent structure is the main cause of the Reynolds stress, a new Reynolds stress expression was given. On this basis the velocity dist
This paper addresses the problem of fault-tolerant multicast routing in wormholerouted multicomputers. A new pseudo-cycle-based routing method is presented for
The influence of tin on the hot ductility of a 0. 15wt%C steel is investigated using a continuous-casting thermal simulator with three cooling rates. Tin can ap
By using of electrolytic pure iron, the specimens containing different oxide content were made in a Mo wire furnace. The DTA method was employed to measure the
用纳米ZnO为原料,以魔芋葡甘聚糖(KGM)为基体,采用共混法制得KGM/ZnO纳米复合物。通过傅立叶红外光谱(FTIR)、热重分析(TG)、透射电镜(TEM)等手段对该体系进行了表征。结果表
This paper presents an approach for camera auto-calibration from uncalibrated video sequences taken by a hand-held camera. The novelty of this approach lies in