联合两段氧化制合成气/F-T合成的GTL工艺和催化剂

来源 :中国化学工程学报 | 被引量 : 0次 | 上传用户:lx84015092
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A novel process for catalytic oxidation of methane to synthesis gas (syngas), which consists of twoconsecutive fixed-bed reactors with air introduced into the reactors, integrated Fischer-Tropsch synthesis, was inves-tigated. At the same time, a catalytic combustion technology has been investigated for utilizing the F-T offgas togenerate heat or power energy. The results show that the two-stage fixed reactor process keep away from explosionof CH4/O2. The integrated process is fitted to produce diesel oil and lubricating oil in remote gas field.
其他文献
The transparent PVC films were prepared by tape casting. In the process of preparation, rare earth nitrate, as a kind of modifier, was added to the solution of
An experimental study of vertical gas conveying of Geldart-D powder as a dilute phase is performed ina pipe of length 22 m and internal diameter 0.05 m using a
A new niobate Ba3NaBiNb10O30 was synthesized by the solid state reaction.The reaction mixture was characterized by thermogravimetric and differential thermal an
Experiments for single and bisolute competitive adsorption were carried out to investigate the adsorptionbehavior ofβ-naphthalenesulfonic acid (NSA) and sulfur
Liquid phase axial mixing was measured with the tracer technique in a packed column with innerdiameter of 0.15 m, in which the structured packing, Mellapak 350Y
The metal matrix composite coatings of Co-Ni-Al2O3 were studied by electrolytic codeposition of Co-Ni alloys and Al2O3 on a Cu substrate from a sulfamate electr
The structure and operating principle of micro valveless pump were investigated theoretically and experimentally. The mathematical model of pressure and flow ra
Removal of inclusions from industrial pure molten aluminum(A01) by stirring active molten flux was studied. Wettability of nonmetallic inclusions in the molten
This paper establishes a mechanical model for sintered powder metal material and simulates the material behavior.Powder metal specimens were compacted, sintered
期刊
A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα