【摘 要】
:
SiC thin-films were prepared by RF-magnetron sputtering technique(RMS) with the target of single crystalline SiC and then annealed. The surface morphology of th
【机 构】
:
School of Physics Science and Technology
论文部分内容阅读
SiC thin-films were prepared by RF-magnetron sputtering technique(RMS) with the target of single crystalline SiC and then annealed. The surface morphology of thin-films was characterized by AFM. The result shows that the surface of the thin-films is smooth and compact; XRD analysis reveals that the thin-films are amorphous. The thickness, square-resistance and curves of resistance-temperature were measured. The results show that the curves of lnR versus 1/kT both before and after annealing satisfy the expression of lnR∝△W/kT, where △W is electron excitation energy in the range of 0.014 2-0.018 5 eV, and it has a trend of increasing when the temperature is increased. After synthetical analysis we get the conclusion that the electronic mechanism of the thin-films is short distance transition between the localized states in the temperature range of 25-250 ℃. The resistivity is in the range of 2.4×10-3-4.4×10-3 Ω·cm and it has the same trend as electron excitation energy when annealing temperature is increased, which further confirms the electronic mechanism of thin-films and the trend of electron excitation energy versus annealing temperature.
其他文献
NiOOH was prepared by one-step electrolysis of spherical Ni(OH)2 and the effects of electrolysis parameters were examined.The higly pure NiOOH was obtained afte
A first-principles plane-wave pseudopotential method based on the density functional theory was used to investigate the energetic and electronic structures of i
This paper presents the adaptive mesh finite element estimation method for analyzing 2D linear elastic fracture problems. The mesh is generated by the advancing
Employing carbonyl iron powder and Ethylene-Propylene-Diene Monomer (EPDM) as the absorbent and matrix, rubber radar absorbing materials (RAM) were prepared. Ef
(Nd0.01Y0.99)3Al5O12 nano-sized powders were synthesized by low temperature combustion (LCS), using Nd2O3, Y2O3, Al(NO3)3·9H2O, ammonia water and citric acid a
The thermal decomposition of potassium titanium hexacyanoferrate(Ⅱ) (KTiFC) loaded with cesium (referred to as Used Exchanget,or UE) was studied at different f
The thermodynamic data of pure Ag and Y were calculated. The phase constitution, composition of micro-region and microstructures of Ag-Y alloy after internal ox
Effects of the volume fraction and the size of crystallized alumina silicate short fibers as well as heat treatment processes on micro-yield strength(MYS) of Al
Kinetic process of oxidative leaching of chalcopyrite in chloride acid hydroxide medium under oxygen pressure and low temperature was investigated. The effect o
By using Nb and Si elemental powders as raw materials, dense Nb/Nb5Si3 composites were successfully fabricated by a spark plasma sintering (SPS) technology. The