Observations on the Formation of Ultrafine Ferrite Grain Size in Steels by Physical Simulation Route

来源 :材料科学技术学报 | 被引量 : 0次 | 上传用户：ocean0228

【摘要】

：

Some observations are reported on the simulation of two thermomechanical routes to produce ultrafine ferrite grainsize in steels. One C-Mn grade and Nb, Nb-Ti a

【作者】

：

L.X. Pan L.P. Karjalainen M. C

【机构】

：

University of Oulu

【出处】

：

材料科学技术学报

【发表日期】

：

2004年期

【关键词】

：

Ultrafine grain size

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

Some observations are reported on the simulation of two thermomechanical routes to produce ultrafine ferrite grainsize in steels. One C-Mn grade and Nb, Nb-Ti and Nb-high Ti bearing steels were used in the tests performed ona Gleeble simulator and a labor

其他文献

垃圾焚烧炉技术探讨——加拿大某垃圾焚烧炉项目简介

垃圾焚烧炉是实现垃圾的无害化和减量化处理的有效方法,科学地设计工作应结合生活垃圾的焚烧特点和有关设计标准规范进行,这是确保垃圾妒高效运行的关键.

期刊

垃圾焚烧炉马丁炉排垃圾处理

Liquid-Phase-Impacting Diffusion Welding Mechanism and Microstructure of Welded Joint of Al Matrix C

The liquid-phase-impacting (LPI) diffusion welding mechanism and microstructure of welded joint of aluminum matrixcomposite SiCp/101A have been studied. It show

期刊

Aluminum matrix composite

Study on the Deformation Characteristics of the Sheet Hydroforming with a Movable Die

An improved sheet hydroforming process with a movable die is proposed and investigated by elastoplastic FEM. The effects of varied process parameters on the def

期刊

Hydroforming

Preparation of Ti3SiC2 with Aluminum by Means of Spark Plasma Sintering

Polycrystalline bulk Ti3SiC2 material with a high purity and density was fabricated by spark plasma sintering from the elemental powder mixture with starting co

期刊

titanium silicon carbidespark plasma sinteringpreparation

Application of Substitutional Model in Oxide Systems

The application of substitutional model in oxide systems, in comparison with that of sublattice model, is discussed.The results show that in the case of crystal

期刊

Oxide systemsGibbs free energyThermodynamics

Effect of Welding Paramenter on Joint Property of Aluminum Matrix Composite in Liquid-Phase-Impactin

In this paper, a new method for welding SiCp/101A was put forward. It is LPI (liquid-phase-impacting) diffusionwelding.

期刊

Aluminum matrix composite

Electron Structure of γ/α2 Phase Boundaries in TiAl Based Alloys

The valence electron structure of γ/α2 phase boundaries in lamellar colonies in Ti-47Al-2M (M=Nb, Cr, V) (at. Pct) was investigated by empirical electron theo

期刊

TiAl based alloy

水力旋流分离器内流动和油水分离的数值模拟

The fluid flow and oil-water separation were simulated using a Reynolds stress transport equationmodel of turbulence in water flow and a stochastic model of oil

期刊

hydrocyclonesoil-water separationnumerical simulation

Effect of Gravity on Arc Shape in GTA Welding-for Low Electric Arc Current

Gas tungsten arc (GTA) welding was performed both in a microgravity environment and in a terrestrial environment,and the arc shapes in both environments were co

期刊

Microgravity

Effect of Traveling Magnetic Field on Mould-Filling Length of the A357 Melt during Casting Thin Wall

In order to improve the mould filling ability, the method for production of thin-walled castings in the travelingmagnetic field was applied. The relationship be

期刊

Mould fillingTraveling magnetic fieldA357 melt

Observations on the Formation of Ultrafine Ferrite Grain Size in Steels by Physical Simulation Route

其他学术论文