刮板是一种简单而又经济的铸模,它可以部分地或全部地代替实型模或泥芯盒来造型或制芯,对于单件、小批生产的铸件尤为适用。但是,在造型过程中,刮板的固定,不过论是桥式还是马架式,都需要砂箱、砖头、木板、压铁来架设。由于采用这些临时措施,不仅架设高度需反复调整,准备时间较长,效率低,而且固定不当还易造成错位,达不到质量要求。针对刮板造型的特点,结合实际情况,我们设计制造了一台永久性的工艺装置──造型刮板支架。 Scraper is a simple and economical mold that can be partially or completely replace the real mold or mud box to form or core, especially for single piece, small batch castings. However, in the modeling process, the scraper fixed, but on the bridge or rack-style, need sand box, brick, wood, iron to erection. Due to the adoption of these interim measures, not only the installation height needs to be adjusted repeatedly, the preparation time is long and the efficiency is low, but improper fixing can easily cause dislocation and fail to meet the quality requirements. In view of the characteristics of the scraper shape, combined with the actual situation, we designed and manufactured a permanent process equipment ─ ─ shape scraper bracket.