【摘 要】
：
The as-cast microstructure, tensile and creep properties of Mg-3Sn-1Ca and Mg-3Sn-2Ca magnesium alloys were investigated and compared by using optical microscop
【机 构】
：
Materials Science and Engineering College,National Engineering Research Center for Magnesium Alloys
论文部分内容阅读
The as-cast microstructure, tensile and creep properties of Mg-3Sn-1Ca and Mg-3Sn-2Ca magnesium alloys were investigated and compared by using optical microscopy and scanning electron microscopy, X-ray diffraction analysis and tensile tests. The results indicate that the as-cast microstructures of Mg-3Sn-1Ca and Mg-3Sn-2Ca alloys are different. The former is mainly composed of a-Mg, eutectic CaMgSn and solid state precipitation of Mg2Sn, whereas the latter is mainly composed of a-Mg, primary CaMgSn, eutectic CaMgSn and Mg2Ca phases. As a result, the two alloys obtain different tensile and creep properties. Mg-3Sn-1Ca alloy shows relatively higher ultimate tensile strength and elongation at room temperature and 150 ℃ than Mg-3Sn-2Ca alloy, however, the yield strengths of Mg-3Sn-1Ca alloy at room temperature and 150 ℃ are relatively low. In addition, the creep properties of Mg-3Sn-1Ca alloy at 150 ℃ and 70 MPa for 100 h are obviously lower than those of the Mg-3Sn-2Ca alloy.
其他文献
The hot deformation behaviour of 7075 aluminium alloy reinforced with 10%of SiC particles was studied by employing both“processing maps”and microstructural ob
The La-Mg-Ni system A2B7-type electrode alloys with nominal composition La0.75-xZrxMg0.25Ni3.2Co0.2Al0.1 (x=0, 0.05, 0.1, 0.15, 0.2) were prepared by casting an
As novel negative electrode materials for alkaline batteries,the electrochemical properties of four lanthanum transition-metal(La-TM)complex oxides LaTiO3,LaVO4
本文从沥青烟产生的机理和对环境的危害，结合多年产品研发的实际，探讨了沥青烟回收与处理的关键技术。
CeO2 nanotubes were synthesized facilely via a layer-by-layer deposition approach using modified attapulgite as hard template.The formation details were investi
电厂在发电过程中其产生的氮氧化物对环境的危害是巨大的，本文着重介绍了火力电厂烟气脱硝技术的要点，探讨了SCR脱硝技术工艺，从其工艺流程、布置方式及催化剂种类等方面进行了
The phosphor Y2SiO5:Ce3+ was prepared by a sol-gel method and the particle growth process was investigated by XRD, SEM and TEM. After heating at 400 ℃, the as-
The non-isothermal leaching kinetics of primary titanium-rich material by microwave heating was investigated, and the temperature-pressure curves of leaching sy
Gypsum crystallization along with the simultaneous regeneration of KCl was investigated by the reaction of CaCl2 solution with K2SO4. Well developed sheet struc