2. 您的位置
3. 首页
4. 期刊论文
5. 2021年1-3月产业用纺织品行业运行简析

2021年1-3月产业用纺织品行业运行简析

来源 :上海纺织科技 | 被引量 : 0次 | 上传用户：yueaimeng

【摘 要】

：

2021年一季度,我国产业用纺织品行业继续保持良好的发展势头,行业规模以上企业的工业增加值同比增长25.4％;规模以上企业的非织造布产量达到152.0万吨,同比增长19.0％,帘子布的产量19.0万吨,同比增长18.4％;规模以上企业的营业收入和利润总额分别达到688.6亿元和43.4亿元,分别同比增长35.1％和27.0％,利润率6.3％,同比下降0.4个百分点.

【出 处】

：

上海纺织科技

【发表日期】

：

2021年6期

下载到本地 , 更方便阅读

下载此文 赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

2021年一季度,我国产业用纺织品行业继续保持良好的发展势头,行业规模以上企业的工业增加值同比增长25.4％;规模以上企业的非织造布产量达到152.0万吨,同比增长19.0％,帘子布的产量19.0万吨,同比增长18.4％;规模以上企业的营业收入和利润总额分别达到688.6亿元和43.4亿元,分别同比增长35.1％和27.0％,利润率6.3％,同比下降0.4个百分点.

其他文献

URANS simulations for a free-running container ship:Part 2.Added power

Part 2 reports the validation,local force and local flow study results for the free-running added power simulations whose conditions are the same as the self-propulsion test except for the increased propeller rotational speed and the presence of wave.When

期刊

Added powerunsteady Reynolds-averaged Navier-Stokes(URANS)KRISO Container Ship

Numerical prediction of hydrodynamic cavitating flow structures and their corresponding erosion

Hydrodynamic cavitating flows usually consist of 3-D intense vortical flows that are detached from solid boundaries.Detached vortical flows normally generate heaps of cavitating flow structures,which,in turn,govern the location of cavitation erosion befor

期刊

Turbulent and cavitating structurescavitation erosiondetached vortical flowHy

New fluid kinematics

Fluid kinematics describes the fluid motion without consideration of any force.Classical fluid kinematics adopts Helmholtz velocity decomposition,which is equivalent to Cauchy-Stokes(CS)velocity gradient tensor decomposition.CS decomposes the velocity gra

期刊

New fluid kinematicsHelmholtzCauchy StokesLiutexprincipal decomposition

Improvement of the SST γ-Reθt transition model for flows along a curved hydrofoil

The transition in the boundary-layer flow affects the hydrodynamic performances of hydraulic machineries,as the key components in the ship propulsion system.The shear stress transfer(SST)γ-Reθt transition model is an important prediction tool in the bound

期刊

Hydrodynamicstransition modelcurvature effecthydrofoilboundary layer transit

Drag reduction and hairpin packets of the turbulent boundary layer over the superhydrophobic-riblets

This paper presents experimental measurements by the time-resolved particle image velocimetry(TR-PIV)for the turbulent boundary layer(TBL)over the smooth surface,the superhydrophobic(SH)surface,and the superhydrophobic-riblets(SR)surface in an open-surfac

期刊

Turbulent boundary layersuperhydrophobicribletsdrag reductionhairpin packets

Identifying the turbulent flow developing inside and around the bottom trawl by Electromagnetic Curr

The Knowledge of turbulent flow developing inside and around the bottom trawl net is of great importance not only for improving the hydrodynamic performance of the gear but also for the selectivity via the fish response,such as the herding response or esc

期刊

Hydrodynamicbottom trawl netturbulent flowElectromagnetic Current Velocity Me

气盾坝盾板与砼侧墙接触面施工关系探讨

随着国家对水利事业的大量资金投入,各类水利工程项目不断建设,安全、环保、生态以及施工简单的一些新型产品新型施工工艺项目也不断地被应用到水利建设项目上.但在产品设计、施工的环节中难免会出现一些不尽人意之处,需要在不断的探索中总结改进.气盾坝在实际运用中存在一定的优点,在诸多工程中都广泛运用.以武夷山市黄柏溪引调水工程为例,设计了气盾坝结构,通过实际调试运行发现两个问题,即气盾坝盾板与砼侧墙接触面之间存在的气盾坝升塌坝出现的盾板启闭不自如、盾板与侧墙面在升坝状态下产生的渗漏水,在此基础上分析了气盾坝盾板与砼侧

期刊

水利工程施工气盾坝与砼侧墙接触面探讨

浅谈在低滩围垦中围堤龙口的设计与施工

通过负责和参与多项淤积性滩涂围垦工程的设计与施工的实践过程,分析与总结围垦造地工程龙口的设计与施工的一些经验和方法.结果 可为类似项目实施时提供参考.

期刊

低滩围垦围堤龙口设计与施工

Suppression of vortex rope oscillation and pressure vibrations in Francis turbine draft tube using v

The vortex rope usually occurs in the draft tube of the Francis turbine operated under part-load conditions,to induce strong low-frequency pressure vibrations,and therefore,is very harmful to the safety of the hydropower unit.In the present work,three kin

期刊

Francis turbinevortex ropepressure vibrationventilationfin installation

影响纳米碳酸钙性能的制备方法研究进展

碳酸钙作为一种工业上来源众多、用途广泛的无机材料,其纳米级的尺寸更扩展了它的应用潜力。综述了不同制备工艺对碳酸钙形貌、尺寸造成的影响,以及晶型控制剂在制备特殊形貌碳酸钙时的作用。单一的添加剂较难得到均匀、特定形貌的产品,探究复合添加剂的使用具有广阔的发展前景。在碳酸钙制备方法的基础上,阐述了表面改性方法和原理,同时对表面改性剂进行了分类,进一步探究纳米级碳酸钙在提高塑料制品的力学、热学性能方面的作用。指出了单一改性剂存在的问题,并对复配改性剂对塑料改性的影响进行了展望。

期刊

纳米碳酸钙晶型控制剂改性塑料应用