论文部分内容阅读
Investigation of the 12 orientations variants of nanoscale Al precipitates in eutectic Si of Al-7Si-
【出 处】
:
材料科学技术(英文版)
【发表日期】
:
0年期
其他文献
为考察热处理工艺对AFA耐热钢组织和力学性能的影响,本文利用光学显微镜、扫描电镜、X射线衍射等技术,研究了新型含铝奥氏体耐热钢(AFA)在不同保温温度和冷却方式下的组织演
A simple and novel effective strategy using mechanical treatment to improve the oxygen uptake/releas
In recent years,oxygen storage materials (OSMs) have been widely used in many fields.It would be particularly important for researchers to design high-oxygen-up
High-temperature oxidation behavior of modified 4Al alumina-forming austenitic steel: Effect of cold
The oxidation behavior and mechanism of as-received and 30 % cold-rolled alumina-forming austenitic (AFA) steel were investigated in dry air at 700 ℃.The result
研究了添加Zr元素的重力铸造AlSi7Mg0.4合金的微观组织和力学性能.结果 表明,在含Zr的铸态合金中生成了(Al,Si)3(Zr,Ti)和π-Fe相,Zr的添加使合金的晶粒尺寸减小;经过T6热处
The sensitivity of ethanol sensor is of paramount importance in a variety of areas,including chemical production with ethanol,alcohol testing for driving safety
Recently,the γ'-strengthened superalloys are of great interests in high temperature applications due to their excellent high temperature strength which is deri
Eco-friendly and degradable red phosphorus nanoparticles for rapid microbial sterilization under vis
Pathogens pose a serious challenge to environmental sanitation and a threat to public health.The frequent use of chemicals for sterilization in recent years has
High-throughput simulation combined machine learning search for optimum elemental composition in med
In medium/high entropy alloys,their mechanical properties are strongly dependent on the chemical-elemental composition.Thus,searching for optimum elemental comp
Solid-state cold spraying of FeCoCrNiMn high-entropy alloy: an insight into microstructure evolution
About 3 mm thick five-element equimolar high-entropy alloy (HEA) FeCoCrNiMn was successfully deposited by solid-state cold spraying (CS).The high-temperature ox