论文部分内容阅读
Wf/Cu82Al10Fe4Ni4 composite was fabricated by means of infiltration casting. By the microstructure observation of the composite with the aid of scanning electron microscopy(SEM) and transmission electron microscopy(TEM), it can be found that there are(Fe, Ni),AlFe, Al3 Ni, and Cu3 Al precipitated phases existing in the matrix alloy. By two-stage light gas gun, Wf/Cu82Al10-Fe4Ni4 composite hypervelocity projectile into concrete target test with the speed of 2.2 kmás-1is finished. By microstructure observation, it can be found that the failure mode of Wf/Cu82Al10Fe4Ni4 composite projectile during penetration is the rapid peeling of tungsten fibers from the projectile, which makes the projectile display good selfsharpening property. Meanwhile, it can be found that microstructure morphology change of Wf/Cu82Al10Fe4Ni4 composite occurs after hypervelocity impact. The density of dislocations around the large-dimensional(Fe, Ni),AlFe, Al3 Ni, and Cu3 Al precipitated phases in the matrix alloy rises sharply. At the same time, there are largedimensional deformed twins existing in local regions and stacking faults existing inside the twins.
By the microstructure observation of the composite with the aid of scanning electron microscopy (SEM) and transmission electron microscopy (TEM), it can be found that there are (Fe, Ni), AlFe, Al3 Ni, and Cu3 Al precipitated an existing existing in the matrix alloy. By two-stage light gas gun, Wf / Cu82Al10-Fe4Ni4 composite hypervelocity projectile into concrete target test with the speed of 2.2 kmás-1is finished. it can be found that the failure mode of Wf / Cu82Al10Fe4Ni4 composite projectile during penetration is the rapid peeling of tungsten fibers from the projectile, which makes the projectile display good selfsharpening property. Meanwhile, it can be found that microstructure morphology change of Wf / Cu82Al10Fe4Ni4 composite occurs after hypervelocity impact. The density of dislocations around the large-dimensional (Fe, Ni), AlFe, Al3 Ni, and Cu3 precipitated phases in the matrix allo y rises sharply. At the same time, there are largedimensional deformed twins existing in local regions and stacking faults existing inside the twins.