用于代替传统的纸类垫片,适合各种形状和尺寸,特别适用于法兰面的密封连接,使用非常便利,性能优越,可耐各种油类和溶剂,工作温度为-70～+315℃,接合面间隙可大至4.76mm,形成垫子后可再次使用。5分钟可结皮,1小时凝固,24小时达到强度。 用法: 1.接合面应清洁、干燥、无油污。 2.拧开软管盖子,用盖子内陷的尖端刺穿管口。然后把喷嘴切开到所需口径,拧紧在软管口上即可使用。 Used to replace the traditional paper gasket, suitable for a variety of shapes and sizes, especially for sealing the flange connection, the use of very convenient, superior performance, resistant to all kinds of oils and solvents, the working temperature of -70 ~ 315 ℃, the interface gap can be as large as 4.76mm, after the formation of mat can be reused. 5 minutes crust, 1 hour coagulation, 24 hours to achieve strength. Usage: 1. The joint surface should be clean, dry, no oil. 2. Unscrew the hose cover and pierce the nozzle with the tip of the cap inset. Then cut the nozzle to the required caliber, tighten the hose port can be used.