By employing a two-dimensional transient thermo-mechanical coupled finite element model for simulating shell heat transfer be-haviors within a slab continuous casting mold, we predicted the evolution of shell deformation and the thermal behaviors, including the mold flux film dynamical distribution, the air gap formation, as well as the shell temperature field and the growth of carbon steel solidification, in a 2120 mm × 266 mm slab continuous casting mold. The results show that the shell server deformation occurs in the off-corners in the middle and lower parts of the mold and thus causes the thick mold flux film and air gap to distribute primarily in the regions of 0-140 mm and 0-124 mm and 0-18 mm and 0-10 mm, respectively, from the corners of the wide and narrow faces of the shell under typical casting condi-tions. As a result, the hot spots, which result from the thick mold flux film filling the shell/mold gap, form in the regions of 20-100 mm from the corners of the wide and narrow faces of the shell and tend to expand as the shell moves downward.