Metal transfer of twin-wire indirect arc argon welding was investigated with high speed camcorder system based on a xenon lamp source and digital oscillograph, forces on droplet were analyzed in this paper. Results show metal transfer mode that of anodal and cathodal is not completely the same. It was divided into seven types of transfer mode; spray transfer and spray-projected transfer are the important transfer mode. The base-plate was melted by energy that of the arc and drop carrying, the drop transfer direction is different from that of the current flow, anodal and cathodal drop transfer at the same time, only the frequence and size are different. Metal transfer of twin-wire indirect arc argon welding was investigated with high speed camcorder system based on a Xenon lamp source and digital oscillograph, forces on droplet were analyzed in this paper. Results show metal transfer mode that of anodal and cathodal is not completely the same. It was divided into seven types of transfer mode; spray transfer and spray-projected transfer are the important transfer mode. The base-plate was melted by energy that of the arc and drop carrying, the drop transfer direction is different from that of the current flow, anodal and cathodal drop transfer at the same time, only the frequence and size are different.