我们采用粘接法修复机床拉伤面,既快又好,亦很经济,如伤面槽沟5×5×150三条维修成本费在1元以内,在机床上(不必拆下)化4小时即可修复。我厂的龙门铣横梁润滑面拉伤5×12×150槽沟,用粘接法修复至今已有5年,仍然完好。 We use the adhesive method to repair machine pulling surface, fast and good, is also very economical, such as wound trenches 5 × 5 × 150 three maintenance costs within 1 yuan, on the machine (no need to remove) for 4 hours Can be repaired. I plant the gantry milling cross-beam lubrication surface injury 5 × 12 × 150 slot, with bonding method has been repaired so far for 5 years, still intact.