【摘 要】
:
The reasonable design of the composition of the composite materials is of great significance to optimized the electromagnetic (EM) wave absorption performance.Herein,the Ni/NiO@C hybrid composites with tunable Ni proportion were successfully synthesized t
【机 构】
:
Institute of Materials for Energy and Environment,State Key Laboratory of Bio-fibers and Eco-textile
论文部分内容阅读
The reasonable design of the composition of the composite materials is of great significance to optimized the electromagnetic (EM) wave absorption performance.Herein,the Ni/NiO@C hybrid composites with tunable Ni proportion were successfully synthesized through a two-step process.With the assistance of X-ray diffraction with refinement treatment,the specific proportion of Ni of as-obtained hybrid com-posites could be obtained.Employing controlling calcination time to adjust the Ni content of Ni/NiO@C hybrid composites,it has been found that the composite carbonized at 500 ℃ exhibited remarkable EM wave absorption with the minimum reflection loss (RLmin) of-49.1 dB at 4.9 mm and the widest effective absorption bandwidth (EABmax) of 4.56 GHz at 2.1 mm.Moreover,by adjusting the Ni source,the optimal EM wave absorption performance could be achieved.Results illustrated that the N3PC with the Ni pro-portion of 13.17 % showed the RLmin as low as-51.1 d B at 2.4 mm and the EABmax was 5.12 GHz at 2.7 mm.It is worth noting that this work demonstrates the relevance of the composition and EM wave absorption performance of hybrid composites,which offers a feasible reference for the absorption mechanism of absorber.
其他文献
P-type semiconductivity has been observed in solid solution series (SrTiO3)1-x(CaCr0.5Nb0.5O3)x (0.0 ≤x ≤ 0.15),which all adopt cubic symmetry and own intense absorption in the visible light region.These solid solutions are superior H2 evolution photocata
1.IntroductionrnHigh strength steels continue to be developed for automotive applications to increase safety and reduce lightweight by down-gauging[1,2].In addition,reducing density is another solution for the lightweight of automotive components[3,4].Alu
The microstructure and room-temperature tensile deformation behavior of the cast CrFeCoNiAl0.7 high-entropy alloy (HEA) were studied in details.The cast HEA consisted of a dual-phase structure of 77.3 vol.% face-centered-cubic (FCC) phase plus 22.7 vol.%
The top-down method was used to fabricate the TiNi1+xSn half-Heusler alloy.Several knotty problems have been solved using the top-down method,including the generation of impurity phases,the visi-ble discrepancy in the grain size of the TiNi2Sn second phas
The influence of different precipitate-dislocation interactions,namely dislocation shearing and bypass-ing mechanisms,on PLC bands and the resultant surface roughness in AlMgScZr alloy was investigated.Three-dimensional surface roughness was quantitativel
Low photothermal conversion efficiency restricts the antibacterial application of photothermal materials.In this work,two-dimensional carbon nanosheets (2D C) were prepared and decorated with Cu nanopar-ticles (2D C/Cu) by using a simple soluble salt temp
The electrochemical properties of a friction stir processed (FSPed) equiatomic CrMnFeCoNi high-entropy alloy (HEA) was investigated in an aerated 0.5 M Na2SO4 electrolyte solution at room temperature.The microstructural analysis reveals a highly refined s
The chain-like prior particle boundaries (PPBs) as a kind of stubborn harmful precipitate will hinder atomic diffusion and particle connection.They can only be broken into nanoscale through thermal defor-mation (1160-1200 ℃).Here,treated by the pulsed ele
The effect of surface gradient nanostructure on the fatigue life of commercial pure (CP) Zr was inves-tigated.Four point bending fatigue tests indicated that the fatigue limit of CP Zr with surface gradient nanostructure was increased by about 28.3 % comp
The microstructural evolution of purity Pd under 30 keV He+ irradiation at 573 K was investigated by in-situ transmission electron microscopy.The nucleation,growth,merging,annihilation,size change,number density variation,and types of dislocation loops we