论文部分内容阅读
为了研究细菌纤维素(BC)网络结构对聚乳酸(PLA)结晶与熔融过程的影响,以PLA为基体,BC为增强体,通过PLA-三氯甲烷溶液与BC-无水乙醇分散液的共混扩散制备了具有互穿网络结构的BC/PLA生物复合材料。采用SEM、偏光显微镜(POM)、DSC和莫志深(MO)模型研究了复合材料的微观形态、球晶形貌、非等温结晶动力学和熔融行为。结果表明:采用溶液共混扩散法可得到以BC为骨架、PLA缠绕其表面的互穿网络结构的复合材料。随降温速率增加,BC/PLA复合材料的结晶温度、熔融温度和相对结晶度均下降。BC可作为异相成核剂,适量添加可同时提高BC/PLA复合材料的结晶速率和相对结晶度,细化球晶尺寸。MO模型可较好地描述BC/PLA复合材料的非等温结晶动力学行为。
In order to study the effect of bacterial cellulose (BC) network structure on the crystallization and melting of polylactic acid (PLA), PLA was used as the matrix and BC as the reinforcement. The PLA-chloroform solution and the BC- BC / PLA composites with interpenetrating network structure were prepared by mixed diffusion. The microstructure, spherulite morphology, non-isothermal crystallization kinetics and melting behavior of the composites were investigated by SEM, POM, DSC and MO model. The results show that the composite material with interpenetrating network structure with BC as skeleton and PLA wound around its surface can be obtained by solution blending diffusion method. With the increase of cooling rate, the crystallization temperature, melting temperature and relative crystallinity of BC / PLA composites decreased. BC can be used as a heterogeneous nucleating agent. The proper amount of BC can improve the crystallization rate and relative crystallinity of BC / PLA composites and refine the spherulite size. The MO model can well describe the non-isothermal crystallization kinetics of BC / PLA composites.