【摘 要】
：
We propose and demonstrate a novel single-longitudinal-mode (SLM) erbium-doped fiber laser (EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 473 Hz and an ultra-high optical sign
【机 构】
：
HebeiKeyLaboratoryofOptic-ElectronicInformationandMaterials,PhotonicsInformationInnovationCenter,Col
【出 处】
：
OptoelectronicsLetters
论文部分内容阅读
We propose and demonstrate a novel single-longitudinal-mode (SLM) erbium-doped fiber laser (EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 473 Hz and an ultra-high optical signal-to-noise ratio (OSNR) more than 72 dB, or operating at wavelength-swept mode with tunable sweep rate of 10—200 Hz and a sweep range more than 50 nm. The excellent features mainly benefit from a triple-ring subring cavity constructed by three optical couplers nested one another and a fiber Fabry-Pérot tunable filter which can be driven by a constant voltage or a periodic sweep voltage for fixed or wavelength- swept operation, respectively. The proposed EDFL has potential applications in high-resolution spectroscopy and fiber optic sensing.
其他文献
Accurate small animal surface reconstruction is important for full angle non-contact fluorescence molecular tomography (FMT) systems. In this letter, an optimal surface reconstruction method for FMT is proposed. The proposed method uses a line search meth
在单晶硅片上, 利用旋涂法, 制备了偶氮染料掺杂高分子(PMMA)薄膜, 利用可变入射角、 波长扫描的全自动椭圆偏振光谱仪, 研究了薄膜的复折射率、 吸收系数和厚度, 分析了影响薄膜电子光谱的因素。 研究结果表明, 该薄膜在400～600 nm波长范围内, 存在强而宽的吸收, 并且发现分子的聚集状态对该染料的吸收光谱有较大的影响。
在紫外光散射通信系统中,脉冲展宽和噪声会对信号产生严重影响。为降低系统误码率、提高通信距离,加入了低密度奇偶校验码(LDPC)进行码元纠错。对比了开关键控(OOK)和二进制相移键控(BPSK)副载波强度调制的性能,仿真分析了BPSK副载波强度调制下不同编码效率、不同译码方式的LDPC码对非直视(NLOS)紫外光通信系统误码率的影响。结果表明:BPSK副载波强度调制的性能优于OOK调制,编码效率越小的LDPC码的纠错能力越强,置信传播算法和对数似然比置信传播算法译码性能几乎一致,均优于最小和算法。在小角度、
A new system of multi-channel single-output joint fractional Fourier transform correlator (JFRTC) for color pattern recognition is proposed based on the conventional system of multi-channel single-output joint transform correlator (JTC). The theoretical a
We propose a method for the real-time measurement of the reflection at both splicing points between a photonic bandgap fiber coil and conventional fiber during the process of fusion splicing in a photonic bandgap fiber optical gyroscope (PBFOG), using the
本文分析了激光的横模结构以及在小孔耦合输出情况下的损耗特征,提出了确定激光谐振腔最佳耦合孔径的简便方法,实验证明效果良好。
基于样本块的纹理传输原理,研究了纹理图像的边缘梯度信息、最小误差路径以及非线性亮度/色度型(YUV)颜色空间的亮度信息对纹理传输结果的影响。在误差度量时,将纹理图像本身的边缘梯度信息和重叠区域的最小误差路径同时作为纹理合成时的度量,并引入源纹理图像和目标图像在YUV颜色空间的亮度信息作为纹理传输的约束度量,能使找到的匹配块更适合纹理传输。同时,在纹理传输过程中采用迭代的方法,解决了大部分纹理通过一
利用无掩模反应离子刻蚀法制备黑硅, 研究了黑硅微结构密度和高度对其光学特性的影响。采用场发射扫描电子显微镜和带积分球的紫外-可见-近红外分光光度计分别表征黑硅微结构形貌和光学特性。研究结果表明, 黑硅微结构密度增大和高度增加, 则黑硅吸收率增大, 高度较大的微结构更加有利于增强黑硅近红外光吸收。无掩模反应离子刻蚀法制备的黑硅的吸收率在高温退火过程中保持稳定。