A new type of membrane bioreactor named "airlift membrane-bioreactor" is discussed. For municipal wastewater reclamation, the preliminary study on airlift membr
There have been reports on sheet forming of Mg alloy in industry via the punch and die method; this paper is probably the first formal one for studying the shee
Effects of Ba filling fraction on the thermoelectric properties of p-type filled skutterudite compounds BayFe1.6Co2.4Sb12(y=0-0.63) were investigated.BayFe1.6Co
In the present study, a modified Hall-Petch correlation on the basis of dislocation pile-up model was used to estimate the yield strength of SiCp/Al composites.
Fundamental studies of the combustion characteristics and the de-HCl behavior of a single refuse-derived fuel(RDF) pellet were carried out to explain the de-HCl
Deterministic chaos theory offers useful quantitative tools to characterize the non-linear dynamic behavior of a fluidized bed and the developed complexity theo
α-tricalcium phosphate(α-TCP)/tetracalcium phosphate(TTCP) composite bone cement had good hydration characteristic.In our system,α-TCP/TTCP powder mixture wa
The performances of dry-grinding fine cement (DFC) in grouting procedure were experimentally studied.The measurement of its fineness and simulated test for inje
A model has been developed for the calculation of the microstructural evolution in a rapidly directionally solidified immiscible alloy. Numerical solutions have
In this paper,advantages and disadvantages of existing calibration methods are presented.Based on the projective transformation which is the basic principle of