预腐蚀铝合金贯穿疲劳裂纹扩展行为的统一表征模型

来源 :腐蚀与防护 | 被引量 : 0次 | 上传用户:panxuanyu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
在环境腐蚀损伤以及疲劳载荷的联合作用下,铝合金结构更容易萌生裂纹,威胁结构安全。腐蚀疲劳短裂纹扩展行为与长裂纹扩展行为差别很大,而且往往短裂纹阶段占据构件疲劳寿命的90%以上。通过对线弹性裂纹扩展模型进行修正,得到了预腐蚀弹塑性裂纹扩展表征模型,并对LD2铝合金进行预腐蚀疲劳验证性试验。结果表明,改进后的模型能够统一地表征预腐蚀弹塑性短裂纹和线弹性长裂纹的扩展行为,对于铝合金构件的腐蚀疲劳寿命预测和损伤容限评估具有重要的参考价值。 Under the joint action of environmental corrosion damage and fatigue load, the aluminum alloy structure is more likely to initiate a crack and threaten the structural safety. The corrosion fatigue short crack propagation behavior varies greatly with the long crack propagation behavior, and tends to account for more than 90% of the component fatigue life in the short crack phase. By modifying the linear elastic crack growth model, the model of pre-corrosion elastic-plastic crack propagation was obtained, and the pre-corrosion fatigue test of LD2 aluminum alloy was carried out. The results show that the improved model can uniformly characterize the expansion behavior of the pre-eroded elastoplastic short crack and the linear elastic crack, which is of important reference value for predicting the corrosion fatigue life and evaluating the damage tolerance of aluminum alloy components.
其他文献
<正> 近年来,我国师范专科学校得到了迅猛的发展,已经成为培养中学师资的具有举足轻重地位的层次。但是,就目前看,一个科学的、体现师范专科学校自身规律和特点的教学体系还
采用湿法超声机械镀锌设备制备了机械镀锌层。采用金相显微镜、扫描电子显微镜(SEM)及其配备的能谱仪分析了镀锌层的结构形貌和化学成分;采用贴滤纸法对镀层进行孔隙率测试。
铝合金的腐蚀以点蚀特征为代表,在腐蚀介质的侵袭下,其构件表面会出现大量的腐蚀坑。这些腐蚀损伤特征对于局部的应力应变产生影响,并且伴随着氢的渗入材料局部的脆性增强,对
为研究航空铝合金材料在机场环境中的腐蚀坑形状特征,选取航空LD2铝合金为研究对象,开展了该材料试件在模拟机场环境中的加速腐蚀试验。选定腐蚀坑长度、宽度和深度三个形状参
采用表面机械研磨(Surface Mechanical Attrition Treatment,SMAT)在304不锈钢表面制备出纳米晶层(平均晶粒尺寸20nm)。采用腐蚀失重试验和极化曲线测试等方法比较了粗晶(Coarse-g