论文部分内容阅读
1、离合器调整 首先检查离合器踏板轴衬套与孔的配合,间隙过大时应予更换新套;离合器片与铆钉头距离使用极限为0.3mm,离合器摩擦片偏摆,使用极限为0.8mm离合器膜片弹簧磨损深度使用极限不大于0.6mm;分离轴承应能转动灵活,踏板高
1, the clutch adjustment First check the clutch pedal shaft bushing and hole with the gap should be replaced when the new set is too large; clutch plate and rivet head use limit of 0.3mm, clutch friction plate deflection, the use of the limit of 0.8mm clutch Diaphragm spring wear depth of not more than 0.6mm; separation of bearings should be able to rotate flexible, high pedal