Line-narrowed electro-optic periodically-poled-lithium-niobate Q-switched laser with intra-cavity op

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:xiaofeixiaheiwa
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
We report a line-narrowed electro-optic periodically-poled-lithium-niobate (PPLN) Q-switched laser with intra-cavity optical parametric oscillation using a grazing-incidence grating, producing 8-ns, 5-\mu J pulses at 10-kHz repetition rate when pumped with a 10-W diode laser at 808 nm. The output wavelength is centered at 1554.3 nm with a 0.03-nm spectral width. Wavelength tuning is achieved by rotating a mirror and changing the crystal temperature.
其他文献
期刊
The so-called “phase difference” is commonly introduced as a phenomenological parameter in Raman tensor theory, so as to fit the experimental data well. Although phase difference is widely recognized as an intrinsic property of crystals, its physics still
Fiber nonlinearity limits the use of coherent optical orthogonal frequency division multiplexing (CO-OFDM) to upgrade wavelength-division multiplexing (WDM) systems using legacy non-return-to-zero-on-off-keying (NRZ-OOK) channels. This letter proposes to
We report electronic properties of a hydrogen atom encaged by an endohedral cavity under the influence of a weak plasma interaction. We implement a finite-difference approach to solve the Schr€odinger equation for a hydrogen atom embedded in an endohedral
期刊
期刊
为了研究激光切割UO2陶瓷芯块-316Ti不锈钢复合结构温度场的分布,考虑了材料的热物性参数与温度的关系,运用ANSYS有限元软件模拟了该复合结构的激光切割过程,通过ANSYS的Fluent模块实现激光热源C语言程序的UDF加载与编译。研究了不同激光切割工艺参数下的温度分布云图,结果表明:温度分布主要呈现为类彗尾状;最高温度集中在切割热源中心处,工件表面的最高温度随着激光功率的增加和切割速度的降低而升高;当激光功率过小或切割速度过大时,工件会因热量输入不足而切不透;当激光功率过大或切
本文详细研究了序列脉冲激光与二能级原子共振作用的Bloch方程的解。在此基础上,结合数值计算,求出了序列脉冲作用下二能级原子的共振辐射谱;并得出如下结论:对满足K_1/K=1的原子(如仅受自然展宽的气体原子),序列脉冲差不多等效于一单色激光场;而对满足K_1/K(?)=1的原子(比如一些固体原子)序列脉冲场中边频成份也表现出较强的作用,辐射谱呈现出多边峰现象。
The behavior of population transfer in an excited-doublet four-level system driven by linear polarized few-cycle ultrashort laser pulses is investigated numerically. It is shown that almost complete population transfer can be achieved even when the adiaba
将半导体可饱和吸收体(SESAM)锁模技术与腔倒空技术结合,采用半导体端面抽运方式实现了具有高重复频率、大单脉冲能量的皮秒激光器的运转。从理论上分析了腔倒空锁模输出的机理,建立起腔倒空锁模激光器运行的物理图像,并对影响激光器倒空率的一些因素进行了研究。实验上,实现端面抽运NdYVO4晶体的SESAM连续锁模后,在锁模腔内插入BBO电光调制晶体,获得10 kHz腔倒空皮秒锁模脉冲输出。当抽运光功率为14.1 W时,输出锁模脉冲的单脉冲能量为6.5 μJ,脉冲宽度为10.4 ps。