论文部分内容阅读
在工作台上测量一般精度的轴件时容易滚动,虽然改用放在M式二块槽铁上进行,但不管测量外径、长度等都很不方便,现在采用一种量轴专用工具,其结构如图所示,测量中很方便,转盘4可以任意转动方向,既方便又能提高功效,减轻劳动强度。此工具对于测量直径50以下,长度500毫米范围内的轴类尤为适用。如果直径大于50,长度超过500毫米以上的轴类可以把转盘4及M
In the workbench to measure the general accuracy of the shaft easy to scroll, although the switch on the M-type two slot iron, but no matter the measurement of diameter, length and so are very inconvenient, now using a special tool for measuring the shaft, Its structure as shown, the measurement is very convenient, turntable 4 can be any direction of rotation, both convenient and can improve efficiency, reduce labor intensity. This tool is particularly suitable for measuring shafts up to 50 mm in diameter and up to 50 mm in diameter. If the diameter is greater than 50, the length of more than 500 mm shaft type can be turntable 4 and M