【摘 要】
：
Mechanical alloying was employed to obtain high-activity Ni-Al powder. The effects of mechanical alloying on the microstructure and characteristics of milled po
【机 构】
：
Materials Science and Engineering School
论文部分内容阅读
Mechanical alloying was employed to obtain high-activity Ni-Al powder. The effects of mechanical alloying on the microstructure and characteristics of milled powder with a normal composition of Ni-22.89 at.% Al-0.5 at.% B were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that a solution Ni (Al) was obtained after milling. During mechanical alloying, the milled powder obtains extra surface energy and crystalline energy because the crystallite size becomes fine and the lattice strain increases with the milling time prolonging. Furthermore, about 0.5 mol% oxide in the particles were formed after milling, and this kind of dispersed oxide is effective to improve the properties of the sintered alloy by dispersion strengthening. It is confirmed that Ni3Al alloy with outstanding properties has been prepared with mechanical alloyed powders.
其他文献
由农民按照自愿互利原则而建立的农村经济合作组织,在保护农民利益、引导农民进人市场方面发挥了重要作用.本文选择其中的典型案例进行研究,重点分析了这类组织所创造的公平
Heat transfer coefficients in nucleate pool boiling were measured on a horizontal copper surface for refrigerants,HFC-134a,HFC-32,and HFC-125,their binary and t
This paper integrated a two-dimensional axisymmetrical transient model applicable to cold-start emission applications.The model can be used to simulate and expl
The anode material Zn4SO4 (OH)6 · 5H2O for nickle/zinc batteries was synthesized by hydrothermal method and was identified by XRD techniques. TG/DAT measuremen
A novel nickel stripper using ammonia as the key component was developed to substitute cyanide for removing nickel film from iron substrates. Its compositions a
The evolution of microsturctures and influence factors of ultrathin hot strips of low carbon steel produced by compact strip production (CSP) techniques were in
明确指出:"节能是国家发展社会经济的一项长远方针",按国内生产总值GDP到2020年比2000年翻两番的能源需求和近三年能源消费增长趋发展,到2020年能源需求量将超过30亿七标准煤
The phase separation and dendrite growth characteristics of ternary Fe-43.9%Sn- 10%Ge and Cu-35.5%Pb-5%Ge monotectic alloys were studied systematically by the g
当前我国城市填埋场符合开采年限的矿化垃圾也逐渐增多,矿化垃圾中含有丰富的有机质和植物生长所需要的氮、磷、钾等营养物质,矿化垃圾的这些特性正好与本地绿化土特性互补.
随着我国经济快速增长.面临的资源和环境压力越来越大,面对这种情况,按照科学发展现的要求,大力发展循环经济,加快建立资源节约型社会,就显得尤为重要、尤为迫切.